-It can also be used to remove excess water from the baking tray or the dough.
Slitter
-The slitter can be used to cut the dough and make slits in the top of the shaped dough of multi-shape bread.
Be careful when you handle the slitter. Its blade is very sharp.
Put the sheath back on the slitter after use and store the slitter in a safe place.
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the
information below, contact the Consumer Care Centre in your country.
Problems with standard recipes and possible solutions
Water or
milk
SaltSugar or
honey
FlourYeastOther
Loaf rises, then fallsDecrease 1-
2tbsp, use
colder liquid
Increase
¼tsp
Increase 1-2tbsp,
use fresher our,
use right type of
our
Decrease 1/8-¼tsp, use
fresh yeast, use right type of
yeast at right setting
Check power
supply
Loaf rises too highDecrease
1-2tbsp, use
colder liquid
Increase
1/4tsp
Decrease
½tsp
Decrease 1-2tbspDecrease 1/8-¼tsp, use right
type of yeast at right setting
Loaf does not rise
enough
Increase
1-2tbsp
Decrease
1/4tsp
Increase
½tsp
Use fresher our,
use right type of
our
Increase 1/8-¼tsp, use fresh
yeast, use right type of yeast
at right setting
Loaf is short and
heavy
Use fresher our,
use right type of
our
Add yeast, use fresh yeast,
use right type of yeast at
right setting
Check power
supply
Crust too lightIncrease
½tsp
Select correct
settings
Loaf is uncookedCheck power
supply, select
correct settings
Loaf is overcookedDecrease
½tsp
Select correct
settings
Bread mixture is
unmixed
Place bread pan
properly,
push kneading
blade correctly
onto shaft in bread
pan
Smoke comes out
of vents
Clean heating
element
High altitude
adjustment
Decrease
1-2tbsp
Decrease
½tsp
Decrease 1/8-¼tsp
Note: When you make corrections to amounts of ingredients, rst change the amount of yeast. If the result is still not satisfactory, make adjustments to
liquids and then to dry ingredients.
Problems with Multi Bread Shaper recipes
ProblemCauseSolution
When shaping Multi Bread
Shaper breads, the dough has
a different shape than
described and shown.
The dough you started out with did not have
a rectangular shape and did not have a
uniform thickness
Flatten out the dough properly with a rolling pin to create a
rectangular shape with a constant thickness.
The dough tears easily and falls
apart (e.g. because it is lumpy)
and it is hard to shape.
You have not added enough water to the
mixture.
The dough was not properly prepared. Make sure you
follow the recipes.
You have worked on the dough too longKnead the dough into a ball again and leave it to rest for 10
minutes. Then start shaping the dough from the beginning.
Knead the dough in two stages, with a 5-minute break in
between.
The dough is sticky and is
difcult to shape
You have added too much water to the
mixture or the water you added was too
warm.
Put some our on your hands, but NOT on the dough or
the work surface. Then continue to knead the dough. Put
some more our on your hands and continue until the
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Philips HD 9040 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Philips HD 9040 in the language / languages: English, German, Dutch, Danish, French, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.
The manual is 28,71 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
