Manual Philips HD 9040 (page 11 of 126) (English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Norwegian, Finnish)

467899

Zoom out

Zoom in

1/126

Note: You can watch the mixing, kneading and baking process through the viewing window. Occasionally,

some moisture may develop on the inside of the window. You can lift the lid to look inside during the

mixing and kneading stages, but DO NOT OPEN THE LID DURING THE BAKING PROCESS

(approximately the last hour of the entire processing time), as this may cause the bread to collapse.

, The display counts down the processing time in steps of 1 minute until the bread is ready.

, Each three seconds, the display shows the progress animation (Fig. 13).

, Whenthebakingprocessisnished,theappliancebeeps.Alternately,themessage‘Fin’

is shown on the display for 1 second and the keep-warm time is shown for 1 second (the

keep-warm time counts up in minutes up to 1 hour). (Fig. 14)

, During the keep-warm time, the keep-warm icon is visible on the display. The program icon is

not visible during the keep-warm time. (Fig. 15)

Note: The keep-warm mode does not work in the Dough program, Pasta Dough, Multi Bread Shaper and

Multi Bread Shaper Sweet programs. If you leave nished dough in the appliance too long, it may over-

rise and produce poor baking results. For the best results, remove the dough at the end of the program

and follow the instructions in the recipe for shaping, resting and baking.

Note: If you do not remove the bread during or immediately after the keep-warm mode is nished, the

crust gets moist and loses its crispiness. The keep-warm mode DOES NOT overbake the bread or make it

darker.

Using the timer

You can use the timer if you want the bread to be ready at a later time. The maximum delay time

that can be set is 15 hours.

For example, set the timer to 15 hours at 17:00 hours to have the bread ready at 08:00 hours

the next morning.

Note: Do not use the timer function with recipes that require fresh ingredients that may go bad, for

instance eggs, fresh milk, sour cream or cheese.

Note: The timer does not work in programs 7, 8, 9 and 11 to 14.

To use the timer:

1 Put all ingredients in the bread pan.

2 Select the appropriate program, loaf size and crust colour for your recipe.

, The total processing time for the selected settings is shown on the display.

3 Calculate the time difference (in hours) between the present time and the time you want the

bread to be ready.

For instance, if the current time is 17.00 hours and you want the bread to be ready the next

morning at 08.00 hours, the time difference is 15 hours.

4 Press the timer increase or decrease button until the display shows the correct time

difference (Fig. 16).

, Every time you press the timer increase or decrease button, the time increases or decreases

by 10 minutes. If you keep the buttons pressed, the time increases or decreases more quickly.

Note: If the time on the display reaches 15 hours and you still keep the timer increase button pressed,

the display goes back to the baking time of the set program.

Note: If you pass the time you want to set, press the opposite button to increase or decrease the time.

5 Press the start/stop/cancel button.

, Theprogressiconstartstoashwhenthebreadmakerstartsoperating.

, The timer counts down the set time in minutes and every three seconds the progress

animation is shown.

, The bread is ready when the timer has counted down to 00:01. ‘Fin’ appears on the display

and the appliance beeps.

ENGLISH 11

4222.003.4017.3.indd 11 02-06-10 14:06

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD 9040 in the language / languages: English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HD 9040

Philips HD 9040 Manual - English, German, Dutch, Danish, French, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 180 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info