459468
22
Zoom out
Zoom in
Previous page
1/116
Next page
• 22 •
Problem Possible Causes Solution
The machine does not turn on.
The machine is not connected to the
electrical network.
Connect the machine to the electrical network.
The pump is very noisy. No water in the tank. Re ll with water (Section 4.4).
The co ee is too cold.
The "machine ready" light (20) was o
while switching the selection knob (17) to
the "
" position.
Wait until the "machine ready" light (20) turns
on.
The  lter holder is not inserted for
preheating (Section 5).
Preheat the  lter holder.
The cups are cold. Preheat the cups with hot water.
The milk does not froth.
It is not possible to prepare a
cappuccino.
Not suitable milk: Powdered milk or low-
fat milk has been used.
Use only cold, whole milk.
Dirty Pannarello. Clean the Pannarello as described in Section 9.
No steam left in the boiler.
Prime the circuit (Section 4.5) and repeat the
steps described in Section 8.
The co ee is brewed too fast,
crema does not form.
There is too little co ee in the  lter
holder.
Add co ee (Section 5).
The grind is too coarse. Use a di erent blend (Section 6).
Co ee is old or not suitable. Use a di erent blend (Section 6).
Old or not suitable pod. Change the pod.
One component missing in the  lter
holder.
Make sure that all components are present and
properly installed.
Co ee is not brewed or brewed
in drips only.
No water. Re ll with water (Section 4.4).
The grind is too  ne. Use a di erent blend (Section 6).
Co ee pressed in the  lter holder. Shake the ground co ee.
There is too much co ee in the  lter
holder.
Reduce the quantity of co ee in the  lter holder.
Knob (3) is open. Close knob (3).
The machine has limescale build-up. Descale the machine (Section 10).
The  lter in the  lter holder is clogged. Clean the  lter (Section 9).
Not suitable pod. Change type of pod.
Co ee  ows out of the edges.
The  lter holder is incorrectly inserted in
the brew unit.
Insert the  lter holder correctly (Section 5).
The upper edge of the  lter holder is
dirty.
Clean the rim of the  lter holder.
The pod is inserted incorrectly.
Insert the pod correctly. Make sure it does not
come out of the  lter holder.
There is too much co ee in the  lter
holder.
Reduce the quantity of co ee using the measuring
scoop.
Please contact the customer service for any problems not covered in the above table or when the suggested
solutions do not solve the problem.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HD 8325 Poemia Class at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD 8325 Poemia Class in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info