375201

Philips hd 4690 Manual

7
Zoom out
Zoom in
Previous page
1/60
Next page
Depending on the hardness of the water in your area, small spots may appear on the heating
element of your kettle when you use it. This phenomenon is the result of scale build-up on
the heating element and on the inside of the kettle over time. The harder the water, the
faster scale will build up. Scale can occur in different colours. Although scale is harmless, too
much scale can inuence the performance of your kettle. Descale your kettle regularly by
following the instructions given in the chapter ‘Descaling’.

This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
Boil-dry protection
This kettle is equipped with boil-dry protection. This device will automatically switch the kettle off if
it is accidentally switched on when there is no water or not enough water in it. The on/off switch
will stay in ‘on’ position, but the power-on light ring will go out. Set the on/off switch to ‘off’ and let
the kettle cool down for 10 minutes. Then lift the kettle from its base to reset the boil-dry
protection. The kettle is now ready for use again.

1
Remove stickers, if any, from the base or kettle.
2 Place the base on a dry, stable and at surface.
3 You can adjust the length of the cord by turning the cord winder clockwise to make it
shorter or anticlockwise to make it longer (Fig. 2).
Before using the kettle for the rst time:
4 Rinse the kettle with water.
5 Fill the kettle with water up to the maximum level and let it boil once (see ‘Using the
appliance’).
6 Pour out the hot water and rinse the kettle once more.
Using the appliance
1
Open the lid by pressing the lid release button (Fig. 3).
2 Fill the kettle with water (Fig. 4).
You can ll the kettle either through the spout or through the open lid.
3 Close the lid.
Make sure that the lid is properly closed to prevent the kettle from boiling dry.
4 Place the kettle on its base.
5 Put the plug in the wall socket.
6 Set the on/off switch to ‘on’ (Fig. 5).
The power-on light ring goes on and the kettle starts heating up.
The kettle switches off automatically when the water has reached boiling point. You will hear
a bell and the light ring goes out.
Cleaning and descaling
Always unplug the appliance before cleaning it.
Do not use any abrasive cleaning agents, scourers etc. to clean the kettle.
,
,
ENGLISH 7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hd 4690 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hd 4690 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info