◗ Always check the sell-by date on the keg at purchase before
installing it.
◗ Do not use the keg if the connection top is damaged. If the
connection top is damaged, the tap unit will not fit onto it.
◗ Unopened kegs will keep best when stored at a stable
temperature.The cooler you store the keg, the better.
◗ The keg is under pressure. Do not remove the connection top or
pierce the keg with a sharp object.
◗ Maximum working pressure: 1.5 bar.
◗ Use the keg only for the HD3600 PerfectDraft. Do not connect
other equipment to the keg.
◗ Do not use kegs from other suppliers than the ones mentioned in
these instructions for use (see chapter 'Keg suppliers' at the end
of these instructions for use).
◗ Do not use damaged kegs in this appliance, as this could harm the
appliance.A damaged keg should be immediately returned to the
shop where it was bought.
◗ The kegs are not stackable.
Preparing for use
Step 1: installing the appliance
1 Put the appliance on a horizontal, even and stable surface,
leaving at least 10 cm free space behind and on both sides of
the appliance for the best performance.
B
Do not put the appliance in a place where it will be exposed to direct
sunlight or to high temperatures (e.g. close to a cooker or an oven).
C
2 You can store excess cord by pushing it into the storage
compartment at the back of the appliance.
3 Insert the plug into the wall socket.
C
4 Install the drip tray.
C
5 Attach the tap handle.
ENGLISH8
