61069
6
Zoom out
Zoom in
Previous page
1/92
Next page
Duration of the tanning session
for each separate part of the body
For persons with very sensitive
skin
For persons with normal
sensitive skin
For persons with less sensitive
skin
4th session 10-15 minutes 20-25 minutes 30-35 minutes*
5th session 10-15 minutes 20-25 minutes 30-35 minutes*
6th session 10-15 minutes 20-25 minutes 30-35 minutes*
7th session 10-15 minutes 20-25 minutes 30-35 minutes*
8th session 10-15 minutes 20-25 minutes 30-35 minutes*
9th session 10-15 minutes 20-25 minutes 30-35 minutes*
10th session 10-15 minutes 20-25 minutes 30-35 minutes*
*) or longer, depending on your skin sensitivity.
Relaxation and your health
Warmth has a relaxing effect. Think of what a hot bath or lazing in the sunshine does to you. You can enjoy the same relaxing effect by selecting
the relax function × or .
Bear in mind the following when you have a relax session:
Avoid getting too hot. Increase the distance between yourself and the lamps, if necessary.
If your head gets too hot, cover it or move your body so that less heat is emitted towards your head.
Close your eyes during a relax session.
Do not let the relax session last too long (see section ‘Relax sessions: how often and how long?’).
Relax sessions: how often and how long?
If you want to pamper your muscles or joints or want to enjoy the relaxing warmth of the Innergize without getting a tan, only switch on the
infrared lamps to get a deep relaxation. If you want to continue enjoying the Innergize’s warmth after your tanning session, switch on the infrared
lamps only for a relax session.
You can take infrared relax sessions several times a day (e.g. 30 minutes in the morning and in the evening).
Preparing for use
You can easily move and store the appliance in transport position (Fig. 2).
1 Put the appliance on the oor as shown in the gure (Fig. 3).
Make sure there is sufcient room on either side of the appliance to allow the legs to move outwards.
2 Press the dual push button in the handgrip (1) and pull the stand slightly up (2). Then release the push button (Fig. 4).
On a smooth oor, the legs of the appliance automatically move outwards. If the oor is not smooth, e.g. a carpeted oor, you may have to put
your foot on one of the legs to allow the other leg to move outwards.
3 Pull up the stand by the handgrip as far as it goes. (Fig. 5)
The stand locks into position with a click.
4 Turn the lamp unit in the direction indicated in the gure. (Fig. 6)
This requires some force at rst. Push the lamp unit in the direction indicated until it locks into position with a click.
You can only switch on the appliance for a tanning or relax session if the lamp unit is in the correct position.
5 Push the legs of the appliance under the bed or sofa you intend to lie down on. The lamps for functions ¼ and × are on the marked side
of the appliance (HB947/HB945 only). (Fig. 7)
6 Press the release buttons in the recesses of the control panel and push the control panel upwards along the stand. Let go of the release
buttons when the lamp unit is at the required height. (Fig. 8)
The distance between the UV lters and your body must be 70cm. The distance between the UV lters and the surface on which you lie
(e.g. a bed) must be 90cm. (Fig. 9)
Pull out the measuring tape to determine whether the appliance is at the required height. (Fig. 10)
The measuring tape automatically rewinds when you operate the red tab. (Fig. 11)
Using the appliance
Tanning or relaxing (HB933)
1 Fully unwind the mains cord.
2 Put the plug in the wall socket.
3 Set the selector to the desired position (Fig. 12).
Choose ¥ if you want to tan your body.
Choose if you prefer a relax session.
4 Consult the chapters ‘Tanning and your health’ and ‘Relaxation and your health’ for the correct tanning or relax time.
5 Put on the protective goggles provided.
Only use these protective goggles when you tan with a Philips tanning appliance. Do not use them for other purposes.
The protective goggles comply with protection class II according to directive 89/686/EEC.
6 Lie down straight below the lamp unit of the appliance.
7 Set the timer to the appropriate time for the session. (Fig. 13)
Note:It can take a few seconds for the lamps to go on. This is normal.
The appliance beeps during the last minute of the session.
-
-
-
-
,
,
,
,
,
,
,
,
ENGLISH6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HB945 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HB945 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info