65293
15
Zoom out
Zoom in
Previous page
1/204
Next page
Storage
1
Let the appliance cool down for 15 minutes before you put it in transport position and store
it.
2 Store the protective goggles in the storage compartment between the two lamps. (Fig. 38)
3 Put the remote control and the cord in the pouch on the back of the control panel (HP8565
only). (Fig. 39)
4 Make sure the cord does not get stuck between parts of the appliance when you put the
appliance in transport position.
5 Turn the appliance away from the bed or sofa and make sure there is enough space around
the appliance to collapse it.
6 Press the two release buttons in the recesses of the control panel and slide the control panel
down the stand as far as it goes. (Fig. 40)
7 Turn the lamp unit in the direction of the arrow. (Fig. 41)
You hear a click when the lamp unit locks in vertical position.
8 Pull the stand slightly backwards and then press the dual push button. Lower the stand slowly
until the lamp unit rests on the oor between the legs. (Fig. 42)
9 Wind the cord and fasten it with the Velcro cord wrap strip. (Fig. 43)
You can store the appliance in a wardrobe or under a bed.
Replacement
Tanning lamps
Have the Philips tanning lamps (Cleo HPA Synergy) replaced by a service centre authorised by
Philips. Only they have the knowledge and skills required for this job and the original spare parts
for the appliance.
The light that the tanning lamps emit becomes less bright in time (i.e. after a few years in case of
normal use). When this happens, you notice a decrease in the tanning capacity of the appliance.
After 750 operating hours, the tanning capacity of the lamps has decreased so much that
replacement of the tanning lamps is advisable.
HP8565/HP8560: the appliance has a counter that records the operating hours of the tanning
lamps. After 750 operating hours, an L appears on the left-hand side of the display to indicate
that replacement of the tanning lamps is advisable (Fig. 44).
Note: Of course, you can choose to postpone replacement for a while by setting a longer tanning time.
Viewing the operating hours of the tanning lamps
1 Set the time to 00 and press the repeat button ( ä) at least 2 seconds to make the
operating hours appear on the display. The maximum number of hours that can be displayed
is 999. When this value has been reached, the counter starts to count up from 000 again.
Note: The operating hours disappear from the display as soon as you release the repeat button (
ä).
HP8565/HP8560: removing the L from display
To remove the L from the display:
1 Make sure time indicated on the display is 00.
2 Press and hold down the START/STOP button.
3 Press and release the repeat button ( ä).
-
-
ENGLISH 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HB 8560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HB 8560 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info