Manual Philips hb 594 (page 8 of 72) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

368410

Zoom out

Zoom in

1/72

3 If you need to move the couch, slide its legs across the oor or carefully lift it slightly off the oor together with another person.

Never try to move the appliance in the way the picture shows. This could cause the frame to become detached from the couch. (Fig. 5)

4 Lift the canopy and position its connecting tubes over the connecting holes. Slide the tubes steadily into the connecting holes of the

couch. (Fig. 6)

Make sure the cord does not get stuck between the couch and the canopy.

Be careful not to get your ngers stuck between the couch and the canopy.

5 Put the plug of the connecting cable in the socket on the lower part of the couch. (Fig. 7)

You can disconnect the plug with a screwdriver as shown in the picture. (Fig. 8)

6 Place the front panel and fasten it with the screws. (Fig. 9)

The only purpose of the panel is to enhance the appearance of the appliance.

7 Insert the mains plug into a wall socket.

Using the appliance

For optimum comfort, use the appliance at an ambient temperature of approximately 18°C. If the couch becomes too warm, reduce the room

temperature to below 20°C.

1 Select the desired settings for the different functions.

Selecting a function:

Use the ¡ and ™ buttons to select a function.

The blinking symbol indicates which function you have selected. (Fig. 10)

Select • to set the tanning time.

Select ª to set the face tanner (HB595 only).

Select > to set the body cooler.

Setting the tanning time

Select • to set the tanning time.

Press the + button to put the time forward and press - to put the time backward. (Fig. 11)

Keep the button pressed to adjust the time more quickly.

Setting the face tanner

Select ª to set the face tanner.

Press the + and - buttons to set the intensity of the face tanner. (Fig. 12)

0 = off

1 = half intensity

2 = full intensity

If you do not set the face tanner, the face tanner operates at full intensity.

If you set the face tanner to half intensity (setting 1) when you have just switched on the appliance, the light of the face tanner does not

dim right away, but after 1 minute. After the rst minute, the light of the face tanner dims or grows stronger right away when you adjust

the intensity.

Setting the body cooler

Select

> to set the body cooler.

Press the + and - buttons to set the body cooler. (Fig. 13)

0 = no body cooling

1 = one body cooler fan on

2 = both body cooler fans on

If you do not set the body cooler, the body cooler operates at setting 2 (both fans on).

2 Put on the protective goggles provided.

Only use these protective goggles when you tan with a Philips tanning appliance. Do not use them for other purposes.

The protective goggles comply with protection class II according to directive 89/686/EEC.

3 Switch on the tanning lamps by pressing the green I button.

The display shows the remaining tanning time.

During the tanning session, the dot next to the time indication blinks.

If you want to switch off the appliance during the tanning session, press the red

\ button.

You can adjust the intensity of the face tanner during the tanning session (HB595 only). Use the

¡ and ™ buttons to select ª and then

set the desired intensity. The new setting becomes active immediately. If you do not adjust the intensity within approx. 5 seconds, the

remaining tanning time is shown on the display again.

If you want to set the facial tanner from 0 (off position) to 1 or 2 while the lamps have not yet cooled down sufciently (min. 3 minutes),

the 0 symbol will blink on the display.

You can adjust the body cooler setting during the tanning session. Use the

¡ and ™ buttons to select > and then set the desired setting.

The new setting becomes active immediately. If you do not adjust the body cooler within approx. 5 seconds, the remaining tanning time is

shown on the display again.

During the last 5 seconds of the tanning session, you hear a beeping sound and the appliance switches off automatically after these 5

seconds.

Stereo active speakers

During tanning, you can listen to your own favourite music by connecting your own audio player (e.g. CD/MP3 or radio) to the appliance.

To connect your own audio player to the appliance, use the cable with 2 jack plugs supplied with the appliance.

1 Insert one jack plug into the AUX socket.

2 Insert the other jack plug into the headphone socket of your audio player (e.g. CD, MP3 or radio).

You can adjust the volume on your own audio player.

Do not set the volume extremely high, as this could cause irreparable damage to the speakers.

ENGLISH8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips hb 594 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips hb 594 Manual

Product: