507800
20
Zoom out
Zoom in
Previous page
1/218
Next page
Question Answer
Why does the iron or
steamer remain cold?
The iron or steamer is not switched on. Press the iron or steamer power-on
button.
The Auto Calc Clean process may be in progress. Wait for the Auto Calc
Clean process to nish and then switch on the appliance again.
The automatic shut-off function may have been activated. The appliance is
switched off automatically when the steam generator has not been used for
10 minutes. Press the iron or steamer power-on switch once to restart the
appliance. It is ready for use when the light on the iron or steamer stops
ashing and lights up continuously.
Why doesn’t the iron
or steamer produce any
steam?
There may not be enough water in the water tank or the water tank is not
placed in the water tank compartment properly. Fill the water tank and put it
back into the water tank compartment properly.
The appliance may not be hot enough to produce steam. Heating up takes
two minutes.Wait until the light on the iron or steamer stops ashing and
lights up continuously.Then press the steam trigger to start steam ironing or
press the steam activator to start steaming.
You may not have pressed the steam trigger on the iron or the steam
activator on the steamer. Press the steam trigger to start steam ironing or
press the steam activator to start steaming.
The automatic shut-off function may have been activated. The appliance is
switched off automatically when the steam generator has not been used for
10 minutes. Press the power-on light of the iron or steamer. It is ready for use
when the light on the iron or steamer stops ashing and lights up continuously.
Why does the appliance
produce noise?
It is normal to hear a pumping sound. When you hear an intermittent noise,
water is intermittently pumped from the water tank into the boiler.
When you hear a long pumping noise, the Auto Calc Clean process is in
progress. This is normal.
The noise you hear may be the sound of the fan. The appliance is equipped
with a fan that runs continuously during use.This fan optimises the
performance of the appliance and cannot be switched off.
If the pumping noises do not stop, rst check if the water tank is placed in the
water tank compartment properly. If this is the case but the noises still persist,
switch off the appliance and contact the Philips Consumer Care Centre or
your Philips dealer.
Why are there water
droplets/wet spots on
the ironing board?
After a long ironing session, steam condenses inside the ironing board, causing
wet spots on the cover. After use, leave the ironing board folded out for
some time to let it dry.
Why do water droplets
come out of the iron?
Water collects inside the supply hose of the iron or steamer and this water
comes out of the iron or steamer as water droplets during the rst few
seconds of steaming at the start of an ironing or steaming session and after
an interruption during the session.
How do I know that I
have to replace the anti-
calc cartridge?
The anti-calc cartridge contains granules that gradually change colour during
use. When the colour has changed completely, the anti-calc cartridge is no
longer effective and you have to replace it. When the anti-calc cartridge
needs to be replaced, the red REPLACE CARTRIDGE light starts ashing and
the system beeps.
ENGLISH20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC9945 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC9945 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 26,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info