461916
11
Zoom out
Zoom in
Previous page
1/126
Next page
Auto-shut-off function
The steam generator automatically switches off when it has not been
used for a while (approx.10 minutes) and the auto-shut-off light in the on/
off button starts to flash. To activate the steam generator again, press any
button on the steam generator. The steam generator starts to heat up again.
Cleaning and maintenance
Descaling the steam generator with the EASY DE-CALC knob
To prevent scale build-up inside the steam generator and to ensure long-
lasting steaming performance, this steam generator has a DE-CALC light
on the control panel. This light flashes after about a month or 10 ironing
sessions. When this light flashes, perform the descaling procedure with
the EASY DE-CALC knob by following the steps below.
Never remove the EASY DE-CALC knob when the steam generator
is hot.
1 Press the on/off button to switch off the steam generator and
remove the plug from the wall socket.
2 Let the steam generator cool down for 2 hours.
3 Place the steam generator on a stable table top, with the EASY
DE-CALC knob over the edge of the table top.
Tip: You can also take the steam generator to a sink and place it so that the
EASY DE-CALC knob is pointing towards the sink.
4 Hold a cup of at least 350cc under the EASY DE-CALC knob to
collect the water that flows out.
5 Turn the EASY DE-CALC knob anti-clockwise to remove it and let
the water with scale particles flow into the cup.
Note: Water starts to ow out of the steam generator as soon as you turn the
EASY DE-CALC knob to remove it.
Note: This steam generator is specially designed to remove scale together with
the water easily and effectively. It is not necessary to shake or tilt the steam
generator.
6 When no more water comes out of the steam generator, reinsert
the EASY DE-SCALE knob and turn it clockwise to fasten it.
7 Put the mains plug in an earthed wall socket and press the DE-CALC
reset button to reset the EASY DE-CALC function. The DE-CALC
light goes out.
ENGLISH 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC9220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC9220 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info