600016

Philips GC8616 - PerfectCare Aqua Manual

7
Zoom out
Zoom in
Previous page
1/44
Next page
Energy saving - ECO mode
By using the ECO mode (reduced amount of steam), you can save energy without compromising
on the ironing result..
Note: For the shortest ironing time, we advise you to use the ‘OptimalTemp’ mode.
1 Press the ECO button when the appliance is switched on (Fig. 4).
2 To go back to the ‘OptimalTemp’ mode, press the ECO button again.
Safety auto-off mode (specic types only)
To save energy, the steam generator switches off automatically when it has not been used for
10 minutes. The light in the on/off button ashes.
To reactivate the steam generator, press the on/off button.
IMPORTANT - cleaning and maintenance
Descaling the appliance
When DE-CALC light is ashing, perform the descaling procedure.This helps to prolong the lifetime
of the appliance and optimise the ironing performance.
If your water is very hard, increase the descaling frequency.
To avoid any risk of burns, make sure the appliance has been unplugged for at least 2 hours and
has completely cooled.
Tip: When you perform the descaling procedure, place the appliance on the edge of the table top or near
the sink. Water may ow out of the appliance when the EASY DE-CALC knob is opened.
1 Hold a cup under the EASY DE-CALC knob and turn the knob anti-clockwise. (Fig. 5)
2 RemovetheEASYDE-CALCknobandletthewaterwithscaleparticlesowintothecup(Fig.6).
3 When no more water comes out of the appliance, reinsert the EASY DE-CALC knob and
tighten it. (Fig. 7)
Descaling the soleplate
If you do not descale your appliance regularly, you may see brown stains coming out of the soleplate
due to scale particles. Descale the soleplate by following the procedure below. We advise you to
repeat the procedure twice for better results.
1 Make sure the appliance is cool and clean the soleplate with a damp cloth.
2 Emptythewatertankthroughthellingdoor.TilttheapplianceandremovetheEASY
DE-CALC knob. Pour 500ml distilled water into the DE-CALC opening and tighten the
EASY DE-CALC knob. (Fig. 8)
3 Switch on the appliance and wait for 5 minutes.
4 Keep the steam trigger pressed continuously while you iron a piece of thick cloth in a
back-and-forth motion for 3 minutes. (Fig. 9)
Hot, dirty water comes out of the soleplate.
5 Stop cleaning when no more water comes out of the soleplate or when steam starts coming
out of the soleplate.
6 Unplug the steam generator and let it cool down for at least 2 hours. Remove the EASY
DE-CALCknobandlettheremainingwaterowout.TightentheEASYDE-CALCknob.
ENGLISH 7
4239_000_8862_1_DFU-Booklet_A5_v1.indd 7 11/1/13 1:55 PM
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC8616 - PerfectCare Aqua at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC8616 - PerfectCare Aqua in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info