696510

Philips GC7923 Manual

5
Zoom out
Zoom in
Previous page
1/54
Next page
7
Ironing
1 Place the appliance on a stable and even surface.
Note: In order to ensure safe ironing we recommend to always place the base on a stable ironing
board, a table, or the oor.
2 Make sure that there is enough water in the water tank.
3 Remove the water supply hose from the storage compartment.
4 Put the mains plug in an earthed wall socket and press the on/o button to switch on the
appliance (Fig. 6). Wait until the ‘iron ready’ light lights up continuously (Fig. 7). This takes about
2 minutes.
5 Press the carry lock release button to unlock the iron from the iron platform (Fig. 8).
6 Press and hold the steam trigger to start ironing (Fig. 9).
Note: When you start your ironing session and especially during the rst usage of steam trigger, it
may take more than 30 seconds for steam to come out of the appliance.
Note: The pump is activated each time you press the steam trigger. It produces subtle rattling
sound. When there is no water in the water tank, the pump sound is louder.
7 For best ironing results, after ironing with steam, perform the last strokes without steam.
Note: If you do not release the trigger early enough and lift the iron to the base, you might notice
that steam still comes out, which is normal. To avoid that eect, we recommand you to leave the
iron on the board while rearranging the garment.
Warning: Never direct steam at people.
MAX mode function
For more powerful steam, you can use the MAX steam mode, which is safe on all ironable fabrics.
For fabrics such as cotton, jeans and linen, you are recommended to use the MAX steam mode.
1 Press and hold the on/o button for 2 seconds until the light turns white.
2 To deactivate the MAX mode, press and hold the on/o button for 2 seconds again until the light
turns blue.
Steam boost function
1 Press the steam trigger twice quickly to release a powerful boost of steam for 3 seconds (Fig. 10).
Note: It is recommended to use the steam boost function only for stubborn crease.
Vertical ironing
Warning: Hot steam is emitted from the iron. Never attempt to remove wrinkles from a garment
while someone is wearing it (Fig. 11). Do not apply steam near your or someone else’s hand.
You can use the steam iron in vertical position to remove wrinkles from hanging fabrics.
1 Hold the iron in vertical position, press the steam trigger and touch the garment lightly with the
soleplate and move the iron up and down (Fig. 12).
Safe rest
Resting the iron while rearranging your garment
While rearranging your garment, you can rest the iron either on the iron platform or horizontally on the
ironing board (Fig. 13). The OptimalTEMP technology ensures the soleplate will not damage the ironing
board cover.
Auto shut-o
- The appliances enters the standby mode if it has not been used for 5 minutes. The light of the on/
o button starts to ash.
- To activate the appliance again, press the on/o button or the steam trigger. The appliance starts
to heat up again.
- The appliance switches o automatically if it has not been used for another 10 minutes after it
enters the standby mode. The light in the on/o button goes o.
Warning: Never leave the appliance unattended when it is connected to the mains. Always unplug
the appliance after use.
English
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC7923 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC7923 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info