Manual Philips GC7833 (page 8 of 74) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

696542

Zoom out

Zoom in

1/74

Note: During the Calc-Clean process, clean water may come out of the soleplate if no scale has

accumulated inside the iron. This is normal.

For more information on how to carry out the Calc-Clean process, refer to the videos in this link:

http://www.philips.com/descaling-iron.

Cleaning the soleplate

To properly maintain your appliance, clean it regularly.

1 Clean the appliance with a moist cloth.

2 To easily and eectively remove stains, let the soleplate heat up and move the iron over a moist

cloth (Fig. 25).

Tip: Clean the soleplate regularly to ensure smooth gliding.

Storage

1 Switch o the steam generator and unplug it.

2 Pour the water out of the water tank into the sink (Fig. 26).

3 Fold the water supply hose. Wind the water supply hose inside the water supply hose storage

compartment and secure it inside the storage hook (Fig. 27).

4 Fold the mains cord and fasten it with the Velcro strip (Fig. 28).

5 Push the carry lock release button to lock the iron onto the iron platform (Fig. 29).

6 You can carry the appliance with one hand by the handle of the iron when the iron is locked on the

iron platform (Fig. 30).

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you

are unable to solve the problem with the information below, visit www.philips.com/support for a list

of frequently asked questions or contact the Consumer Care Center in your country.

Problem Possible cause Solution

The iron does not

produce any steam.

There is not enough water in

the water tank.

Fill the water tank beyond the MIN

indication. Press and hold the steam trigger

until steam comes out. It may take up to 30

seconds until steam comes out.

You did not press the steam

trigger.

Press and hold the steam trigger until

steam comes out.

The steam function has

been disabled until you

have performed the Calc-

Clean process.

Perform the Calc-Clean process to restore

the steam function. (see chapter ' Cleaning

and maintenance')

At the start of your ironing

session, the steam trigger

has not been pressed long

enough.

Press and hold the steam trigger until

steam comes out. It may take up to 30

seconds until steam comes out.

The light of the CALC-

CLEAN button ashes

and the appliance beeps.

This is the Calc-Clean

reminder.

Perform the Calc-Clean after the Calc-

Clean reminder is given (see chapter

'Cleaning and maintenance').

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC7833 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips GC7833 Manual

Product: