Manual Philips gc6440 02 (page 13 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

321828

Zoom out

Zoom in

1/120

Problem Cause Solution

You have been ironing at too high

temperatures.

Clean the soleplate with a damp

cloth. Set the iron to the required

ironing temperature (see chapter

‘Preparing for use’, section ‘Setting

the temperature’).

Steam escapes

from the lling

hole area during

ironing.

You may not have tightened the steam

tank cap properly or you have spilled

some water around the lling hole

Switch off the appliance and let it

cool down. Remove the steam tank

cap, wipe away the water round the

lling hole and tighten the steam

tank cap again. Then switch on the

appliance again.

Wet spots

appear on the

garment during

ironing

The wet spots that appear on your

garment after you have steam ironed

for some time may be caused by

steam that has condensed onto the

ironing board. Iron the wet spots

without steam for some time to dry

them. If the underside of the ironing

board is wet, wipe it dry with a piece

of dry cloth.

To prevent steam from condensing

onto the ironing board, use an

ironing board with a wire mesh top.

I cannot put the

iron on its heel.

This iron has been designed in such a

way that it can only be placed

horizontally.

Place the iron on the heat-resistant

iron resting mat.

 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips gc6440 02 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips gc6440 02 Manual

Product: