Manual Philips GC6360 (page 12 of 64) (English)

60512

Zoom out

Zoom in

1/64

Problem Cause Solution

The iron has not been switched on. Make sure the iron switch is set

to ‘on’.

Smoke comes

out of my new

iron when I

switch it on.

Some parts of the appliance have been

lightly greased in the factory and may

initially give off some smoke when heated.

This phenomenon is perfectly

normal and will cease after a

short while.

The iron does

not produce any

steam.

The steam tank and/or the iron may not

be switched on.

Set both the iron switch and the

steam tank switch to ‘on’.

There is not enough water in the water

tank.

Fill the water tank (see chapter

‘Preparing for use’).

The steam tank has not heated up

sufciently.

Wait for 6 to 8 minutes for the

steam tank to heat up.

The selected ironing temperature is too

low for steam ironing.

Select a temperature of

2 or

higher.

When the iron has been set to a very

high temperature, the steam produced is

dry and hardly visible. It will be even less

visible when the ambient temperature is

relatively high and it will be entirely

invisible when the temperature has been

set to MAX.

Set the iron to a lower

temperature, e.g.

2, to check if

the iron is actually producing

steam.

Water droplets

come out of the

soleplate.

The temperature dial may be set to a

temperature that is too low for steam

ironing.

Select an ironing temperature

that is suitable for steam ironing

(temperature settings 2 to

MAX).

You may not have switched on the iron. Set the iron switch to ‘on’ and

wait until the iron is hot.

You may have placed the steam tank on

an unstable and/or uneven surface.

Place the steam tank on a stable

and even surface.

When you start steam ironing and when

you have stopped steam ironing for a

while, the steam that was still present in

the supply hose will have cooled down

and condensed into water, which causes

water droplets to come out of the

soleplate.

This is perfectly normal. Hold the

iron over an old cloth and press

the steam activator. The cloth

absorbs the drops. After a few

seconds, the steam production

normalises.

Water droplets

come out of the

soleplate when I

use the steam

boost function

(GC6360 only).

Steam may have condensed in the hose,

the temperature may have been set

below

3 or the appliance may not be

ready for steam ironing.

Make sure the temperature is set

3 or higher. Steam iron for

a few seconds before you use the

steam boost function.

ENGLISH12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC6360 in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips GC6360

Philips GC6360 User Manual - Dutch - 120 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips GC6360 Manual

Product: