666370

Philips GC5033 Manual

4
Zoom out
Zoom in
Previous page
1/46
Next page
ENGLISH
8
Using the appliance
Type of water to use
This appliance has been designed to be used with tap water. However, if you live in an
area with hard water, fast scale build-up may occur. Therefore, it is recommended to use
distilled or demineralized water to prolong the lifetime of the appliance.
Do not use perfumed water, water from the tumble dryer, vinegar, starch, descaling
agents, ironing aids, chemically descaled water or other chemicals, as they may cause
water spitting, brown staining or damage to your appliance.
Ironable fabrics
1 Check whether the garment is ironable by reading the label on the garment (Fig. 1-3).
Do not iron non-ironable fabrics. Prints on the garment are not ironable either.
Steam settings
1 To change steam settings, tilt the iron up slightly (about 20 degree and more), and
press steam button on top of the handle (Fig. 1-5)
Note: All steam settings are equipped with OptimalTEMP technology and are safe to
use on all ironable fabrics.
- ( setting) (Fig. 1-6): enabled by the sensor, perfect amount of steam
is produced automatically when needed during movement of the iron. Steam stops
when the iron is not moved or put to vertical position.
It is recommended to use the setting for ultimate convenience on all garments.
- (MAX setting) (Fig. 1-7): maximum constant steam is delivered continuously for
stubborn creases. For best result on tough fabrics such as cotton, jeans and linen, it
is recommended to use the MAX setting. Steam stops when the iron is put to vertical
position.
- (ECO setting) (specic types only) (Fig. 1-8): minimum constant steam is
delivered continuously for garments with less creases. This setting also saves energy.
Steam stops when the iron is put to vertical position
- (ionic setting) (specic types only) (Fig. 1-9): powerful constant steam boost
rich with silver ions is delivered for more hygienic ironing. Steam stops when the iron is
put to vertical position.
- (steam o setting) (Fig. 1-10): select this setting to iron without steam.
Tip: In any steam setting, you can press the steam button during ironing for more steam.
Auto shut-o
The safety auto-o function automatically switches o the appliance if it has not been
used for 2 minutes resting on its soleplate or 8 minutes resting on its backplate. The
display panel ashes to indicate the appliance is at auto-o status.
To let the appliance heat up again, pick up the appliance or move it slightly. The display
panel turns to breathing and the appliance starts to heat up.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC5033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC5033 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 13,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info