544796
13
Zoom out
Zoom in
Previous page
1/42
Next page
Problem Possiblecause Solution
The iron does not
produce any steam.
There is not enough water in
the water tank.
Fill the water tank (see chapter ‘Preparing
for use’, section ‘Filling the water tank’.
The steam slider is set to ‘no
steam’.
Set the steam slider to MAX (see chapter
‘Preparing for use’, section ‘Steam settings’).
The iron is not hot enough yet
to produce steam.
Wait until the SmartLight has stopped
ashing and lights up steadily.
The iron does not
produce a steam boost.
You have used the steam boost
function too often within a very
short period.
Continue ironing in horizontal position
and wait a while before you use the steam
boost function again.
The iron is not hot enough yet
to produce a steam boost.
Wait until the SmartLight has stopped
ashing and lights up steadily.
Water droplets drip
onto the fabric during
ironing.
You have not closed the water
tank lid properly.
Press the lid until you hear a click.
You are ironing while the
SmartLight is blinking.
Wait until the SmartLight lights up steadily
before ironing.
You have put a chemical into the
water tank.
Rinse the water tank and do not put any
perfume or chemical into the water tank.
The iron leaves a shine
or an imprint on the
garment.
The surface to be ironed was
uneven, for instance because
you ironed over a seam or a
fold in the garment.
The iron is safe to use on all ironable
garments. The shine or imprint is not
permanent and disappears when you wash
the garment. Avoid ironing over seams or
folds. You can also place a cotton cloth over
the area to be ironed to avoid imprints.
ENGLISH 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC4918 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC4918 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info