582533
12
Zoom out
Zoom in
Previous page
1/42
Next page
Storage
1 Slidethesteamsliderto‘nosteam’.
2 Removetheplugfromthewallsocket.
3 Emptythewatertankandlettheironcooldowninasafeplace.
4 Windthemainscordaroundthecordwindingareaandxitwith
thecordclip.PutthemainscordbelowtheCordFixindicationto
ensure the mains cord does not touch the hot soleplate during
storage.
5 Storetheirononitsheelinasafeanddryplace.
Troubleshooting
This chapter summarises the most common problems you could have with
the appliance. If you are unable to solve the problem with the information
below, visit www.philips.com/support for a list of frequently asked
questions or contact the Consumer Care Centre in your country.
Problem Possiblecause Solution
The iron cannot
remove wrinkles from
the garment.
There is no steam during ironing. Put water inside the water tank. Set the
steam slider to MAX.
Water drips from the
soleplate after the iron
has been unplugged or
has been stored.
The steam slider is set to MAX. Set the steam slider to ‘no steam’.
You have put the iron in
horizontal position with water
still left in the water tank.
Empty the water tank.
The light on the iron is
amber instead of blue,
and keeps ashing.
The Calc-Clean reminder light
has been activated. This is a
regular reminder for you to
descale the appliance.
Perform the Calc-Clean process (see
chapter ‘Cleaning and maintenance’, section
‘Calc-Clean System’).
The SmartLight
pulsates slowly.
The Safety Auto-off mode is
active. The iron has switched
to standby mode (see chapter
‘Safety Auto-off’).
Move the iron to reactivate it. The iron
starts heating up again. Start ironing again
only when the SmartLight lights up steadily.
Dirty water and
impurities come out
of the soleplate during
ironing.
Hard water with impurities or
chemicals has formed akes
inside the soleplate.
Use the Calc-Clean function one or
more times (see chapter ‘Cleaning and
maintenance’, section ‘Calc-Clean System’).
The iron is plugged
in, but the soleplate is
cold.
There is a connection problem. Check the mains cord, the plug and the
wall socket.
ENGLISH12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC4914 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC4914 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info