Manual Philips GC 7220 (page 9 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

112425

Zoom out

Zoom in

1/120

Note: When you switch on the appliance, the steam tank produces a pumping sound. This sound is

normal and indicates that water is pumped into the steam tank.

Tips

If you have ironed at a high temperature and then set the temperature dial to a lower setting,

wait until the temperature light goes on again before you continue ironing. This prevents damage

to your fabrics.

Start ironing the articles that require the lowest ironing temperature, such as those made of

synthetic bres.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.

Iron velvet and other fabrics that tend to acquire shiny patches in one direction only (along with

the nap) while you apply very little pressure.

Do not use steam when you iron coloured silk. This could cause stains.

Using the appliance

Note: Some smoke and particles may come out of the iron when you use it for the rst time. This is

normal and stops after a short while.

Note: When you switch on the appliance, the steam tank produces a pumping sound. This sound is

normal and indicates that water is being pumped into the steam tank.

Steam ironing

Never direct the steam at people.

Steam ironing is only possible at higher ironing temperatures (temperature settings

2 to MAX).

1 Make sure that there is enough water in the water tank.

2 Select an ironing temperature between 2andMAX.(Fig.6)

3 Putthemainspluginanearthedwallsocketandsettheon/offswitchtoon(GC7320/

GC7220)orpresstheon/offbutton(GC7330/GC7240/GC7230)(Fig.7).

The power-on light on the steam tank and the iron temperature light go on to indicate that

the steam tank and the iron start to heat up.

GC7330/GC7240/GC7230:Thehighsteamsettinglightashestoindicatethatthesteam

tank is heating up.

After approx. 2 minutes, the steam light stays on continuously, to indicate that the water in

the steam tank is hot enough for steam ironing.

4 GC7330/GC7240/GC7230:Pressthesteamsettingselectortosetasteamsettingsuitable

fortheselectedironingtemperature:(Fig.8)

Select the low steam setting for temperature setting

Select the low or high steam setting for temperature settings

3 to MAX.

5 Keepthesteamactivatorpressedinwhileyousteamiron.(Fig.9)

When you put the iron down after ironing, put it on its heel or on the iron stand.

If you want to use the steam function continuously, slide the steam activator lock to the locking

position. To stop steaming, release the steam activator lock (Fig. 10).

Release the steam lock when you put the iron on its heel or on the iron stand. This makes the

water in the water tank last longer.

Note: If you have not used the steam function for some time, the steam that was still present in the

supply hose will have condensed into water. When you start to steam iron again, this can cause some

spluttering in the appliance and some water droplets to escape from the soleplate.

ENGLISH 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC 7220 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips GC 7220

Philips GC 7220 User Manual - English, Polish - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips GC 7220 Manual

Product: