112046
12
Zoom out
Zoom in
Previous page
1/112
Next page
Problem Cause Solution
The selected ironing temperature is too
low for steam ironing.
Select a temperature of 2 or
higher.
When the iron has been set to a very
high temperature, the steam produced is
dry and hardly visible. It will be even less
visible when the ambient temperature is
relatively high and it will be entirely
invisible when the temperature has been
set to MAX.
Set the iron to a lower
temperature, e.g. 2, to check if
the iron is actually producing
steam.
Water droplets
come out of the
soleplate.
The temperature dial may be set to a
temperature that is too low for steam
ironing.
Select an ironing temperature
that is suitable for steam ironing
(temperature settings 2 to
MAX).
You may not have switched on the iron. Set the iron switch to ‘on’ and
wait until the iron is hot.
You may have placed the steam tank on
an unstable and/or uneven surface.
Place the steam tank on a stable
and even surface.
When you start steam ironing and when
you have stopped steam ironing for a
while, the steam that was still present in
the supply hose will have cooled down
and condensed into water, which causes
water droplets to come out of the
soleplate.
This is perfectly normal. Hold the
iron over an old cloth and press
the steam activator. The cloth
absorbs the drops. After a few
seconds, the steam production
normalises.
Flakes and
impurities come
out of the
soleplate.
The iron is new. This is normal. The particles are
harmless ans stop coming out of
the soleplate when you have
used the iron a few times.
The soleplate is
dirty.
You may have ironed at a temperature
that is too high.
Clean the soleplate with a damp
cloth. Select the recommended
ironing temperature.
Impurities or chemicals present in the
water have deposited in the steam vents
and/or on the soleplate.
Clean the soleplate with a damp
cloth.
Dirty water
comes out of the
soleplate.
Too much scale and minerals have
accumulated inside the steam tank.
Rinse the steam tank. See chapter
‘Cleaning and maintenance’.
The iron
produces steam
continuously.
You have slid the steam activator to the
locking position.
Release the steam lock if you
only want to obtain steam when
pressing the steam activator.
ENGLISH12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC 6310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC 6310 in the language / languages: German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips GC 6310

Philips GC 6310 User Manual - English, Polish - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info