322988
14
Zoom out
Zoom in
Previous page
1/130
Next page
Solution
This phenomenon will cease after a
short while.
These particles are harmless and they
will stop coming out of the soleplate
when you have used the iron a few
times.
Select an ironing temperature that is
suitable for steam ironing
(temperature settings 2 to MAX).
Set the iron switch to 'on' and wait
until the iron is hot.
Put the steam tank on a stable and
even surface.
This is normal. Hold the iron over an
old cloth and press the steam
activator.The cloth will absorb the
drops.After a few seconds the steam
production will have normalised.
Set both the iron switch and the
steam tank switch to 'on'.
Wait 6 to 8 minutes for the steam
tank to heat up.
To check if the iron is really producing
steam, hold a (cold) mirror in front of
the soleplate vents.
Clean the soleplate with a damp cloth.
Clean the soleplate with a damp cloth.
Select the recommended ironing
temperature.
Possible cause
This is normal. Some parts of the iron
have been greased lightly in the
factory.
This is normal with a new iron.
The temperature dial has been set to
a temperature that is too low for
steam ironing.
The iron is not switched on.
The steam tank has been placed on an
unstable and/or uneven surface.
When you start steam ironing, the
hose is cold. Steam condenses in the
hose, causing droplets of water to
escape from the soleplate.
The steam tank and/or the iron
has/have not been switched on.
The steam tank is not hot enough to
produce steam.
Superheated (i.e. high-quality) steam is
hardly visible, especially when the
temperature dial has been set to
maximum position and even less so
when the ambient temperature is
relatively high.
Impurities or chemicals present in the
water have deposited on the
soleplate.
You have been ironing at too high
temperatures.
Problem
Some smoke comes out of the
appliance after it has been switched on
for the first time.
Dirt particles come out of the soleplate
of the new iron.
Droplets of water escape from the
soleplate.
The appliance does not produce any
steam.
There is no steam coming out of the
soleplate.
The soleplate is dirty.
ENGLISH14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips gc 6102 provapor azur double speed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips gc 6102 provapor azur double speed in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info