112559

Philips GC 4630 Manual

8
Zoom out
Zoom in
Previous page
1/48
Next page
3 To set the required ironing temperature, turn the temperature dial to the appropriate
position (see ‘Temperature and steam settings’ table) (Fig. 7).
Check the laundry care label for the fabric type.
If you do not know what kind or kinds of fabric an article is made of, determine the right ironing
temperature by ironing a part that is not visible when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. To
prevent stains, do not use the spray function.
Start ironing the articles that require the lowest ironing temperature, such as those made of
synthetic bres.
4 Set the appropriate steam setting (see ‘Temperature and steam settings’ table) (Fig. 8).
Note: Make sure that the steam setting you select is suitable for the set ironing temperature.
5 Put the mains plug in an earthed wall socket.
, The amber temperature light goes on (Fig. 9).
6 When the amber temperature light has gone out, wait a while before you start ironing.
The temperature light goes on from time to time during ironing.


1 Set the steam control to position 0 (= no steam).
2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting
temperature and steam setting’).

Note: The iron may give off some smoke when you use it for the rst time. This ceases after a short while.
1 Make sure that there is enough water in the water tank.
2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting
temperature and steam setting’) (Fig. 7).
3 Set the appropriate steam setting (see chapter ‘Preparing for use’, section ‘Selecting
temperature and steam setting’) (Fig. 8).
Note: The iron starts to produce steam as soon as it reaches the set temperature.

When you use the Ionic DeepSteam function during steam ironing, the steam produced is ner than
during regular steam ironing. Fine steam reaches deeper, especially into thick fabrics. This helps you
to remove stubborn creases easily.
1 Make sure that there is enough water in the water tank.
2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting
temperature and steam setting’) (Fig. 7).
3 Set the appropriate steam setting (see chapter ‘Preparing for use’, section ‘Selecting
temperature and steam setting’). (Fig. 8)
4 Press and hold the Ionic DeepSteam trigger (Fig. 10).
, The blue Ionic DeepSteam light goes on and you hear a humming sound (Fig. 11).
5 The iron now produces Ionic DeepSteam to help you remove even the toughest
creases (Fig. 12).
8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC 4630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC 4630 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info