321864
10
Zoom out
Zoom in
Previous page
1/43
Next page
Solution
Check the cord, the plug and the wall
socket.
Set the temperature dial to the
required temperature.
Fill the water tank (see Filling the
water tank).
Set to steam position q or w (see
Steam ironing).
Set the temperature dial to a
temperature in the steam area (2
to MAX). Put the iron on its heel and
wait until the amber pilot light has
gone out before you start ironing.
Put the iron in horizontal position and
wait for a while before using the
(Vertical) Shot of Steam function
again.
Set the temperature dial to a
temperature in the steam area (2
to MAX). Put the iron on its heel and
wait until the amber pilot light has
gone out before you start ironing.
Use the Calc-Clean function a few
times (see 'Calc-Clean').
Shake the iron lightly to deactivate
the auto shut-off function: the pilot
light will stop blinking.
Set the temperature dial to a
temperature in the steam area (2
to MAX). Put the iron on its heel and
wait until the amber pilot light has
gone out before you start ironing.
Possible cause(s)
Connection problem.
Temperature dial set at MIN.
Not enough water in the water tank.
The steam control has been set to
position O.
The soleplate is not hot enough
and/or the Drip Stop function (types
GC2032, 2030, 2025, 2020 only) has
been activated.
The (Vertical) Shot of Steam function
has been used too often within a
very short period.
The soleplate is not hot enough.
Hard water forms flakes inside the
soleplate.
The auto shut-off function has been
activated. See "Automatic shut-off"
section.
The temperature has been set too
low.
Problem
The iron is plugged in but the
soleplate is cold.
No steam
No Shot of Steam (types GC2032,
2030, 2025, 2016, 2015, 2012,2011,
2010 only) or no Vertical Shot of
Steam (types GC2032, 2030, 2025,2
016, 2015 only).
Flakes and impurities come out of
the soleplate during ironing.
Red pilot light is blinking (type
GC2032, 2030 only).
Water drips out of the soleplate
(types GC2016, 2015, 2012, 2011,
2010, 2006, 2005 only).
Information & service
If you need information or if you have a problem, please visit the Philips
Web site at www.philips.com or contact the Philips Customer Care
Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or contact the Service
Department of Philips Domestic Appliances and Personal Care BV.
Troubleshooting
This chapter summarises the most common problems you could
encounter with your iron. Please read the different sections for more
details. If you are unable to solve the problem, please contact the
Philips Customer Care Centre in your country.
ENGLISH10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips gc 2030 mistral 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips gc 2030 mistral 2000 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info