4 If the temperature light does not go on after you move the
iron, the soleplate still has the right temperature and the iron is
ready for use.
Cleaning and maintenance
Calc-Clean function
◗ You can use the Calc-Clean function to remove scale and
impurities.
Use the Calc-Clean function once every two weeks. If the water in
your area is very hard (i.e. when flakes come out of the soleplate
during ironing), the Calc-Clean function should be used more
frequently.
1 Set the steam control to position O.
2 Fill the water tank to the maximum level.
Do not pour vinegar or other descaling agents into the water tank..
3 Set the temperature dial to MAX.
4 Put the plug in an earthed wall socket.
5 Unplug the iron when the temperature light has gone out.
C
6 Hold the iron over the sink and set the steam control to the
Calc-Clean position (1).The steam control will spring up
slightly.
C
7 Pull the steam control upwards a little further and gently shake
the iron to and fro.
B
Steam and boiling water will come out of the soleplate. Impurities and
scale (if any) will be flushed out.
C
8 Pull the steam control out of the iron. Use vinegar to remove
scale, if any, from the needle.
Do not bend or damage the steam control needle.
ENGLISH 11
