371053
34
Zoom out
Zoom in
Previous page
1/43
Next page
3139 116 19774
34
English
Disc Change
You can change the outer two discs
while the third inner disc is stopped or
is playing.
1 Press DISC CHANGE.
The CD carousel tray slides out.
2 Replace the discs in the left and right
disc trays.
If you wish to change the inner disc
during playback, press DISC
CHANGE again.
"DISC CHANGE" will be
displayed.
The CD will stop playing.
The CD carousel tray will close to
retrieve the inner CD then open
again with the inner CD
accessible.
3 Press OPENCLOSE to close the
CD carousel tray.
Selecting a desired track
Selecting a desired track when
playback is stopped
1 Press í or ë (or Digit 0-9 on the
remote control) until the desired track
appears on the display.
2 Press É (PLAY) to start playback.
The selected track number and
elapsed playing time appear on
the display.
Selecting a desired track during
playback
Press í or ë (or Digit 0-9 on the
remote control) until the desired track
appears on the display.
The selected track number and
elapsed playing time appear on
the display.
If you press í once it will skip to
the beginning of the current track
and play the track again.
Note:
Pressing
í
during shuffling can only
skip to the beginning of the current
track.
Searching for a particular
passage during playback
Press and hold à or á until the
desired passage is located.
The volume will be reduced.
Play returns to normal when à or
á is released.
CD
Programming Tracks
Programming tracks of a loaded CD is
possible when playback is stopped. The
display will indicate the total tracks
stored in the program. Up to 40 tracks
can be stored in the memory in any
order. When 40 tracks are stored and
you attempt to store another track, the
display will show "PROGRAM FULL".
1 Load the desired discs in the disc
trays.
2 Press PROG to start programming.
The PROG starts flashing.
3 Press the CD (CD 1•2•3) or
CD 1/2/3 button to select the disc.
4 Press í or ë (or Digit 0-9 on the
remote control) to select the desired
track.
5 Press PROG to store the track.
Repeat steps 3 to 5 to store other
discs and tracks.
6 Press Ç once to end programming.
The total number of tracks
programmed and total playing
time appear on the display.
Notes:
If the total playing time is more than
"
99:59
" or if one of the programmed
tracks has a number greater than 30,
then "
--:--
" appears on the display
instead of the total playing time.
If the system is reading the disc,
programming is not possible,
"READING" will be displayed and
followed by "DISC X" "X" is the
current read disc number.
During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Reviewing the program
Reviewing of the program is possible
only when playback is stopped.
1 Press í or ë repeatedly to review
the programmed tracks.
2 Press Ç once to exit review mode.
Playing the program
1 PressÉ (PLAY) to start program
playback.
"PLAY PROGRAM" will be
displayed.
The track number and elapsed
playing time of the current track
will appear on the display.
If you press REPEAT during
program playback, the current track
or all programmed tracks will be
played repeatedly.
"TRACK" or "PROGRAM" will be
displayed.
The REPEAT and PROG appear on
the display.
2 Press Ç to stop program playback.
pg 01-43/D5/37-Eng 7/13/00, 11:51 AM34
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips fw d 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips fw d 5 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info