489440
14
Zoom out
Zoom in
Previous page
1/124
Next page
Troubleshooting
This chapter summarises the most common problems you could encounter with the machine. If you
are unable to solve the problem with the information below, visit www.philips.com/support for
a list of frequently asked questions or contact the Consumer Care Centre in your country.
Problem Cause Solution
The robot does
not start cleaning
when I press the
on/off switch.
The rechargeable
battery is empty.
Charge the rechargeable battery (see chapter
‘Preparing for use’, section ‘Charging’).
The small plug is still
inserted in the socket
on the robot.
The robot does not work on mains power. It only
works on its rechargeable battery. Therefore, always
disconnected the adapter from the robot and the
mains before use.
The robot does
not work and the
dust
compartment
indicator lights up
continuously.
The dust container
compartment cover is
not present or is not
closed properly.
When the dust container compartment cover is not
present or is not closed properly, the robot does not
work as a safety precaution. Make sure you place the
dust compartment cover on the robot properly (see
chapter ‘Before rst use’, section ‘Inserting the
rechargeable battery’).
The dust container is
not present.
Place the dust container in the dust container
compartment properly. Make sure you close the dust
container compartment cover properly.
The robot starts
to move
backwards during
cleaning or just
after it was
switched on. The
warning indicator
ashes quickly.
The bumper of the
robot is stuck.
If the robot manages to free its bumper by moving
backwards, the warning indicator stops ashing and
the robot starts cleaning normally. If the robot does
not manage to free its bumper, switch it off and lift it
so that its bumper comes free. Then switch on the
robot again.
The warning
indicator ashes
quickly.
One or both wheels
are stuck.
Press the on/off switch to switch off the robot.
Remove the uff, hair, thread or wire that is caught
around the wheel suspension.
One or both side
brushes are stuck.
Clean the side brushes (see chapter ‘Cleaning and
maintenance’, section ‘Cleaning the side brushes’).
The bumper is stuck. Press the on/off switch to switch off the robot. Lift
the robot so that its bumper comes free.
The robot was lifted
while it was cleaning.
Press the on/off switch to switch off the robot. Place
the robot on the oor. Then press the on/off switch
to make the robot resume cleaning normally.
The robot does
not clean
properly.
The bristles of one or
both side brushes are
crooked or bent.
Replace the side brushes (see ‘Replacing the side
brushes’ in chapter ‘Replacement’ and chapter
‘Ordering accessories’).
ENGLISH14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips FC8802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC8802 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info