489440
9
Zoom out
Zoom in
Previous page
1/124
Next page
Inserting the rechargeable battery
You have to insert the rechargeable battery before use.
1 Puttherobotonaatandstablesurfaceinfrontofyouwiththebumpertowardsyou.
2 Pressthetworibbedareasonthedustcontainercompartmentcoverrmlytounlock
it (Fig. 8).
3 Slide the cover off the robot (Fig. 9).
4 Push the plug of the rechargeable battery onto the connector in the rechargeable battery
cavity.
Note: The plug only ts on the connector in one way: with the tab on the side of the hook on the
connector (Fig. 10).
5 Place the rechargeable battery in the rechargeable battery cavity (Fig. 11).
6 Slide the dust container compartment cover back onto the robot until it locks into
position (Fig. 12).
Note: Make sure the two cover latches slide into the appropriate holes in the housing of the robot. The
robot does not work and the dust compartment indicator ashes when the cover latches have not been
inserted properly (see chapter ‘Using your robot’, section ‘Indicator signals and their meaning’).
Preparing for use
Charge the battery for at least 4 hours each time to ensure the rechargeable battery performs best
and has a long life. A fully charged battery gives you a cleaning time of approximately 50 minutes on
hard oors.
Charging
1 Make sure the on/off switch is in ‘off’ position when you start charging the robot.
2 Insert the small plug of the adapter into the socket for the small plug on the robot. Insert the
adapter into a wall socket (Fig. 13).
3 Whentherechargeablebatteryischarging,thebatteryindicatorashesslowly(Fig.14).
4 When the rechargeable battery is fully charged, the battery indicator lights up
continuously (Fig. 15).
Note: It is possible that the on/off switch is still in ‘on’ position while charging. In that case, the robot will
not work when you press the on/off switch once to start a new cleaning run. You have to press the on/off
switch a second time to switch on the robot.
Using your robot
Preparing for cleaning
1 Beforeyouswitchontherobot,cleartheooroflooseobjectssuchastoys,magazinesand
shoes.Removemainscords,wiresandthepullcordsofcurtainsorblindsfromtheoor.
2 Remove the small plug from the socket on the robot if it is still inserted (Fig. 16).
Note: The robot does not operate when it is connected to the mains. Therefore, always disconnect the
adapter from the robot and the mains before use.
Note: Always store the adapter in a safe place before you switch on the robot.
3 Makesurethedustcontainerisemptyandthelterisproperlyinstalled.
ENGLISH 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips FC8802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC8802 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info