489440
8
Zoom out
Zoom in
Previous page
1/124
Next page
21 Wheel covers
22 Bottom ventilation grille
23 Side brush shafts
24 Drop-off sensors
25 Front wheel
26 Spare side brushes (FC8802 only)
27 Spare lter (FC8802 only)
How your robot works
What your robot cleans
This robot is equipped with features that make it a suitable cleaner to help you clean the oors in
your home.
The robot is especially suitable for cleaning hard oors, such as wooden, tiled or linoleum oors. It
may experience problems cleaning soft oors, such as carpet or rugs. If you use the robot on a
carpet or rug, please stay close by the rst time to see if the robot can deal with this type of oor.
How your robot cleans
Cleaning system
The robot has a 2-stage cleaning system to clean your oors efciently.
- The two side brushes help the robot clean in corners and along walls. They also help to work
dirt loose from the oor (Fig. 2).
- The suction power of the robot picks up loose dirt and transports it through the suction
opening into the dust container (Fig. 3).
Cleaning patterns
The robot uses a systematic cleaning strategy that consists of three cleaning patterns.
1 Straight pattern
2 Spiral pattern
3 Wall-following pattern
The robot uses these patterns in the following order:
1 A straight pattern, followed by a spiral pattern (Fig. 4)
2 A wall-following pattern, followed by a spiral pattern (Fig. 5)
When the robot has completed this sequence of patterns, it starts moving in straight lines again. The
robot continues to use this sequence of patterns to clean the room until the rechargeable battery is
empty, or until it is switched off manually.
How your robot avoids stairs
The robot is tted with three drop-off sensors in the bottom.
- These drop-off sensors are used to detect and avoid height differences. In some cases,
depending on specic circumstances in your home, the drop-off sensors may not detect a
staircase or other height difference in time. Therefore avoid using the robot in these situations
or monitor it carefully (Fig. 6).
Before rst use
Mounting the side brushes
1 Unpack the side brushes.
2 Push the side brushes onto the shafts on the bottom of the robot (Fig. 7).
Note: Make sure you attach the side brushes properly. Press them onto the shaft until you hear them
lock into position with a click.
ENGLISH8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips FC8802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC8802 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info