489441
12
Zoom out
Zoom in
Previous page
1/124
Next page
Cleaning the side brushes
After some time, uff, hairs and threads start to accumulate around the shafts of the side brushes. To
ensure proper functioning, clean the side brushes and the shafts from time to time.
1 Make sure the on/off switch is in ‘off’ position.
2 Placetherobotupsidedownonaatsurface.
3 Grab one of the side brushes by its bristles (Fig. 29).
4 Pull the side brush upwards to remove it from the shaft (Fig. 30).
5 Removeuff,hairsandthreadsfromtheshaftandfromthesidebrushwithasoftbrush(e.g.
a toothbrush) or a cloth (Fig. 31).
6 Push the side brush back onto the shaft (Fig. 32).
7 Repeat steps 2 to 5 for the other shaft and the other side brush.
Storage
1 Switch off the robot by setting the on/off switch to ‘off’ position.
2 Emptythedustcontainerandcleanthelter(seechapter‘Cleaningandmaintenance’).
3 Remove the side brushes from their shafts.
4 Store the robot in a dry place with a temperature of at least 15°C.
Note: After a long period of storage, always charge the robot before you switch it on.
Replacement
Replacing the lter
Replace the lter if it can no longer be cleaned properly.
1 Make sure the on/off switch is in ‘off’ position.
2 Remove the dust container from the robot (see steps 2 to 4 of chapter ‘Cleaning and
maintenance’, section ‘Emptying and cleaning the dust container’).
3 Carefullyliftthelidoffthedustcontainerandremovetheoldlter.Emptythedust
container (Fig. 33).
4 Placethenewlterinthedustcontainerandplacethelidonthedustcontainer(Fig.34).
5 Put back the dust container and the dust container compartment cover (see steps 10 and 11
of chapter ‘Cleaning and maintenance’, section ‘Empying and cleaning the dust container’).
Replacing the side brushes
Replace the side brushes after some time to ensure proper cleaning results.
Note: Always replace the side brushes when you notice signs of wear. We also recommend that you
replace both side brushes at the same time.
1 Make sure the on/off switch is in ‘off’ position.
2 Placetherobotupsidedownonaatsurface.
3 Grab one side brush by its bristles and pull it off the shaft (Fig. 30).
4 Push the new side brush onto the shaft (Fig. 32).
ENGLISH12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips FC8800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC8800 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info