Manual Philips FC8796 Robot SmartPro Easy (page 8 of 86) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

673173

Zoom out

Zoom in

1/86

Placing the batteries in the remote control

The remote control works on two AAA batteries.

1 Push the tab (1) to unlock the battery compartment lid (2) and remove the battery compartment lid

(Fig. 9).

2 Insert two AAA batteries (Fig. 10).

Note: Make sure the + and - poles point in the right direction.

3 To reattach the battery compartment lid, first insert the lug into the opening in the rim of the

compartment (1) and then push down the lid (2) until it locks with a click (Fig. 11). Now the remote

control is ready for use.

Preparing for use

Installing the docking station

1 Insert the small plug of the adapter into the socket on the docking station (1) and insert the adapter

into the wall socket (2) (Fig. 12).

2 Place the docking station on a horizontal, level floor against a wall.

Note: Make sure that there are no obstacles or height differences 150 cm in front, 30 cm to the right

and 100 cm to the left of the docking station (Fig. 13).

Charging

1 Place the robot on the plugged-in docking station (Fig. 14).

2 The start/stop button starts flashing (Fig. 15).

3 When the rechargeable battery is fully charged, the start/stop button lights up continuously (Fig.

16).

Preparing the room for a cleaning run

Before you start the robot on its cleaning run, make sure that you remove all loose and fragile

objects from the floor (Fig. 17).

Remove all cables, wires and cords from the floor to prevent the robot from getting entangled in

them.

If there is a rug with tassels in the room you want the robot to clean, fold the tassels under the rug

to prevent the robot from getting stuck on the tassels and to prevent the rug from getting damaged

(Fig. 18).

Using your robot

Using the remote control

1 Place the robot on the docking station or press the start/stop button on the robot (Fig. 19) to

activate the robot.

Now you can use the remote control to operate the robot.

Starting and stopping

1 Press the start/stop button on the remote control (Fig. 20).

2 The start/stop button on the robot lights up continuously and the robot starts cleaning (Fig. 21).

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC8796 Robot SmartPro Easy in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips FC8796 Robot SmartPro Easy

Philips FC8796 Robot SmartPro Easy User Manual - English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish - 46 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips FC8796 Robot SmartPro Easy Manual

Product: