Manual Philips FC8772 Robot - SmartPro Compact (page 9 of 130) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

673188

Zoom out

Zoom in

1/130

Note: The robot only searches for the docking station automatically when it started cleaning from the

docking station.

Preparing the room for a cleaning run

Before you start the robot on its cleaning run, make sure that you remove all loose and fragile objects

from the floor (Fig. 18).

Also remove all cables, wires and cords from the floor.

Using your robot

Starting and stopping

1 Press the start/stop button.

You can press the start/stop button on the robot (Fig. 19).

You can also press the start/stop button on the remote control (Fig. 20).

2 The start/stop button is continuously on and the robot starts cleaning (Fig. 21).

3 The robot cleans in the auto-cleaning mode until its battery runs low. In the auto-cleaning mode, it

follows repeated sequences of Z-pattern, random, wall-following and spot-cleaning patterns (Fig.

22).

Note: To select an individual mode, press one of the mode buttons on the remote control. See

section 'Cleaning mode selection' for more details.

4 When the battery runs low, the start/stop button starts flashing and the robot searches for the

docking station to recharge (Fig. 17).

5 You can also press the start/stop button to interrupt or stop the cleaning run. If you press the

start/stop button again and there is still enough energy in the rechargeable battery, the robot

continues cleaning in the auto-cleaning mode.

6 To make the robot return to the docking station before the rechargeable battery runs low, press

the docking button on the remote control (Fig. 23).

The start/stop button starts flashing and the robot searches for the docking station (Fig. 24).

Note: If you did not start the robot from the docking station, it does not search for the docking

station automatically when the rechargeable battery runs low. If there is still enough energy in the

rechargeable battery, you can press the docking button on the remote control to make the robot

return to the docking station. If the rechargeable battery is completely empty, you have to place

the robot on the docking station manually.

Operating the docking station

The docking station has two controls that can be used to operate the robot.

Battery full and go button

If you press the battery full and go button on the docking station while the robot is charging, the robot

starts cleaning as soon as the rechargeable battery is full (Fig. 25).

24h button

If you press the 24h button on the docking station, the docking station starts to count down the 24

hours until the next cleaning run. When the countdown is finished, the robot starts cleaning until its

battery runs low and then returns to the docking station automatically to recharge (Fig. 26).

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC8772 Robot - SmartPro Compact in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips FC8772 Robot - SmartPro Compact

Philips FC8772 Robot - SmartPro Compact User Manual - English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips FC8772 Robot - SmartPro Compact Manual

Product: