Manual Philips FC8234 (page 9 of 88) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish, All languages)

706023

Zoom out

Zoom in

1/88

7 Put the clean lter back into the lter holder.

8 Fit the two lugs at the bottom of the lter holder into the brackets (1). Then press the lter

holder home (‘click’) (2). (Fig. 19)

9 Place the bottom edge of the dustbag in front of the ridge on the bottom of the appliance

(1). Pull the cardboard front of the dustbag towards you (‘click’) (2). (Fig. 20)

Note: If no dustbag has been inserted, you cannot close the cover.

10 Close the cover.





Tip: We advise you to clean the motor protection lter every time you replace the dustbag (see chapter

‘Cleaning’).

Always unplug the appliance before you replace the dustbag.



In some cases, the dustbag-full indicator can indicate that the dustbag is full, even though it is not.

This may occur if the pores of the dustbag are clogged (e.g. when you have vacuumed ashes, ne

sand, lime, cement dust and similar substances) or if something is blocking the nozzle, tube and/or

hose. If the pores of the dustbag are clogged, you have to replace the dustbag, even if it is not full

yet. If the dustbag is not clogged but not full either, something is blocking the nozzle, tube and/or

hose. In this case, do not replace the dustbag but remove the obstruction.



- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.

even when the nozzle is not placed on the oor (Fig. 21).

1 Pull at the cover release tab (1) and open the cover (2) (Fig. 15).

2 Pull the clamps aside (1) and pull the dustbag forward (2) (Fig. 16).

3 Pull the cardboard tag upwards to lift the dustbag out of the appliance. (Fig. 17)

, The dustbag is sealed automatically.

4 Place the bottom edge of the new dustbag in front of the ridge on the bottom of the

appliance (1). Pull the cardboard front of the dustbag towards you (‘click’) (2) (Fig. 22).

Note: If no dustbag has been inserted, you cannot close the cover.

5 Close the cover.



Your vacuum cleaner is equipped with a Clean Air HEPA outlet lter (service code 4222 459

48841).

Replace the Clean Air HEPA outlet lter every 12 months.

1 Switch off and unplug the appliance.

2 Pull at the grip on the lter grille (1) and remove it from the appliance (2) (Fig. 23).

3 Remove the Clean Air HEPA outlet lter from the appliance (Fig. 24).

4 Insert a new Clean Air HEPA outlet lter into the appliance (Fig. 25).

5 Reattach the lter grille to the appliance (‘click’) (Fig. 26).

 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC8234 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 2,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips FC8234 Manual

Product: