482521
7
Zoom out
Zoom in
Previous page
1/140
Next page
Warning
- Check if the voltage indicated on the adapter corresponds to the local mains voltage before you
connect the appliance.
- Do not use the vacuum cleaner, the charging base or the adapter if it is damaged.
- If the adapter or charging base is damaged, always have it replaced with one of the original type
in order to avoid a hazard.
- The adapter contains a transformer. Do not cut off the adapter to replace it with another plug,
as this causes a hazardous situation.
- This appliance can be used by children aged 8 or above and by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given
instructions in safe use of the appliance or supervision to establish safe use and if they have
been made aware of the hazards involved.
- Do not allow children to play with the appliance.
- Children are only allowed to empty the dust compartment, clean the lter unit and clean the
appliance under supervision.
Caution
- Remove the adapter from the wall socket before you clean the charging base.
- Only charge the vacuum cleaner with the adapter and charging base supplied. During charging,
the adapter feels warm to the touch. This is normal.
- Always switch off the vacuum cleaner after use.
- The voltage on the contact strips in the charging base is low and therefore not dangerous.
- Never block the exhaust air openings during vacuuming.
- Switch off the appliance when you charge it.
- Always use the vacuum cleaner with the lter unit assembled.

This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.

1 Remove any protective foil or plastic from the appliance.
2 Attach the back support to the back of the charging base (‘click’) (Fig. 2).
Note: You only have to do this once. Never disassemble the back support from the charging base.
Note: You do not have to attach the back support if the extra stability the back support provides is not
required.
Tip: For better stability you can also mount the charging base to the wall. To do so, drive the screw
supplied through the hole in the back support into the wall.
3 Place the upper stick part on the lower stick part (‘click’) (Fig. 3).
Note: You only have to do this once. Never disassemble the upper stick from the lower stick.
4 Fasten the screw with a screwdriver or coin.
5 Placethestickontheoornozzle(‘click’)(Fig.4).
ENGLISH 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips FC6161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips FC6161 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info