316420
9
Zoom out
Zoom in
Previous page
1/92
Next page
11 Slide the holder with dustbag into the appliance in such a way that the holder is kept in place
by the two ridges in the container (Fig. 17).
12 Put the motor unit back into the container and close the clamps (‘click’). (Fig. 18)
13 Put the micro lter into place (specic types only) (Fig. 19).
Note: See chapter ‘Replacement’ for replacing the paper dustbag or chapter ‘Cleaning and maintenance’
for emptying the reusable dustbag (some countries only).

Always remove the paper or reusable dustbag (some countries only) and the micro lter (specic
types only) before wet use.

To vacuum liquids, you need the oat unit and the diffuser.
1 Make sure the appliance is unplugged.
2 Undo the clamps (Fig. 10).
3 Lift the motor unit from the container by the handle (Fig. 11).
4 Remove the reusable dustbag (some countries only) or the paper dustbag (see chapter ‘Repla
cement’) (Fig. 20).
5 Insert the oat unit into the container by its handle (Fig. 21).
Note: The oat unit only ts into the appliance in one way.
6 Turn the motor unit upside down (Fig. 12).
7 Insert the diffuser into the motor unit (Fig. 22).
8 Put the motor unit back into the container and close the clamps (‘click’) (Fig. 18).
9 Remove the micro lter (specic types only) (Fig. 23).
Note: If the micro lter is exposed to excessive air humidity, it loses its electrostatic properties.
Now the appliance is ready for vacuuming liquids.

To shampoo oors, you need the oat unit, the diffuser, the shampoo reservoir (lled with shampoo
and water), the double-injection nozzle and the shampoo trigger.
1 Follow steps 1 to 9 in ‘Preparing for vacuuming liquids’.
2 Fill the shampoo reservoir with cold water (Fig. 24).
3 Add one measuring cup of cleaning liquid to the full reservoir (Fig. 25).
4 Attach the shampoo reservoir to the appliance (Fig. 26).
5 Insert the short shampoo hose into the connector on the vacuum cleaner (1) and turn it
anticlockwise (2) (Fig. 27).
6 Connect the long shampoo hose to the shampoo trigger (Fig. 28).
7 Fasten the shampoo trigger to the handgrip of the suction hose (Fig. 29).
8 Firmly insert the end of the long shampoo hose into the connector on the vacuum cleaner
(‘click’) (Fig. 30).
- To release the shampoo hose, push the ring towards the appliance (Fig. 31).
 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips fc 6844 01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips fc 6844 01 in the language / languages: English, German, Dutch, French, Italian, Turkish as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info