Manual Philips FAXJET 555 (page 34 of 44) (English)

445571

Zoom out

Zoom in

1/44

34 Philips · IPF 520 · 525 · 555

Switch on the Flash Function for

the Extension

For older telephone systems, the outside line access code

can be R (= FLASH). Only in this setting can a connection

to the public telephone network be made. With the flash

function switched on, a flash signal is triggered with the R

key.

1 Press MENU.

RECEPT. SET-UP appears on the

display.

2 Select using [

INSTALLATION.

3 Confirm with o.

STATION NAME appears on the

display.

4 Select using [

TEL.LINE SETUP.

5 Confirm with o.

LINE TYPE appears on the display.

6 Select using [

PBX FLASH.

7 Confirm with o.

8 Using [ select whether by pressing the R key, a flash

signal should be triggered or not.

9 Confirm with o.

Connecting Additional

Devices

Additional Devices

You can operate additional devices on a telephone line,

such as cordless telephones, answering machines, modems

or charge counters.

Connection to the Device

You can connect additional devices directly to your device.

1 Insert the telephone cable of the additional device into

the EXT socket (RJ-11-connection) at the bottom of

the device.

Connection to the Telephone Line

Order of Connections

In order for the fax switch to function, the device must be

first in the series if multiple devices are connected to the

same telephone socket. Follow the correct order.

Connection to the Fi rst Telephone Socket

Using Additional Telephones

(Easylink)

Easylink

With the Easylink function you can control your device

with additional telephones. To use this function, addi-

tional telephones must be set to the tone dialling mode

(DTMF/MFV tones) (for this purpose see the operating

manual of your additional telephone).

Starting Fax Reception

If you pick up at an additional device and hear that you are

receiving a fax (whistling tone or silence), you can start the

fax reception by pressing ** on the additional tele-

phone.

Changing Code

Changing Easylink Codes!

1 Press MENU. RECEPT. SET-UP appears on the

display.

2 Select using [

INSTALLATION.

3 Confirm with o.

STATION NAME appears on the

display.

4 Select using [

TEL.LINE SETUP.

5 Confirm with o.

LINE TYPE appears on the display.

6 Using [ select

REMOTE CONTROL.

7 Confirm with o.

8 Using [ select

YES.

9 Confirm with o.

10 Enter the new code for starting fax reception.

11 Confirm with o.

12 You can exit with j.

Notice

Outside Line Access Code is Automati-

cally Dialled

Store telephone numbers in the telephone book

at the beginning using R to automatically estab-

lish a connection to the public telephone net-

work. By pressing the R key, E appears on the

display.

Notice

Connection to the First Telephone

Socket

If you have multiple telephone sockets for the

same telephone line, the device must be con-

nected to the first telephone socket.

CAUTION!

Changing Easylink Codes!

Change the code only if it is absolutely neces-

sary. The code must begin with * or # .

Notice

Switching Off Function

You can switch this function off, if in step 8 you

select

NO, confirm using oand exit using j.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips FAXJET 555 in the language / languages: English as an attachment in your email.

The manual is 5,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips FAXJET 555

Philips FAXJET 555 User Manual - English - 44 pages

Philips FAXJET 555 User Manual - German - 44 pages

Philips FAXJET 555 User Manual - Dutch - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips FAXJET 555 Manual

Product: