Manual Philips Faxjet 325 (page 22 of 32) (English)

44405

Zoom out

Zoom in

1/32

D If your fax machine does not ask you automatically, after

the new cartridge has been inserted, you can reset the copy

counter in function 49 (see New cartridge).

D The cartridge cannot be refilled.

Easylink

Easylink is used in conjunction with additional devices con-

nected to the same telephone line (e.g. cordless phones). How-

ever, the additional phone must be set to dual-tone multi-fre-

quency method. If your telephone connection requires the

pulse dialling method, then you would need to briefly reset

your additional device to use it. For more information about

this, please see the user manual for your device.

Starting fax reception

When you answer a call on the fax machine and recognise

that it is a fax (you hear a beep or no sound), press START

and hang up. The fax will be received.

When you answer using an additional phone and it turns

out to be a fax, you can start the fax reception by pressing

*5 and then hang up. The fax machine will receive the fax.

Interrupt ringing

When you answer an additional phone and the fax machine

continues to ring, this means that the extension phone is con-

nected in parallel. You can interrupt the ringing of the fax

machine by pressing **.

Changing codes

Select Function 34 by pressing MENU, 34, and then OK.

Enter two different codes and confirm each code with OK.

Each code should begin with * or #.

D Please note that the three Easylink codes must be differ-

ent. Otherwise on the display appears

CODE NOT OK.

v Only change the specified codes *5 and **

if absolutely necessary!

Service code

Function 45 (Service code) is used to delete some or all of

your changes to the factory settings. This function enables

you to partially or fully reconfigure your device. It is especially

helpful if you have modified settings but find that your fax

machine does not respond as expected.

v Only use this function when absolutely necessary.

If you are satisfied with your changes to the factory settings

you should not use this function.

After deleting some or all of your custom settings please re-

run Easy Install.

The following codes are at your disposal:

Code No. 7117

This code erases all your modifications to the factory settings.

The fax machine will therefore react in exactly the same way

as on first installation.

Code No. 7140

When you enter this code, all your entered settings and data

will be erased, except for:

• received fax messages

• stored short dial numbers

• stored telephone book numbers

• your name

• your telephone number

Example for using a service code:

1 Select MENU, 45 and press OK. Enter the service

code (7117 or 7140). Press OK.

2 With u you can select whether you really want to de-

lete your settings. Confirm with OK. Your fax machine

will be reset to its original configuration.

Care and

maintainance

Before opening the fax machine, make sure that you

are electrically discharged by e.g. touching the metal

housing of a grounded appliance, a water pipe or ra-

diator.

Cleaning the machine

Use a soft, fluff-free cloth lightly moistened with a little alco-

hol (96%). You can also use a special cloth for cleaning fax

machines, which is available on the market. Do not allow any

moisture to penetrate inside the device.

Clean the scanner glass

1 Open the operation panel by lifting in the middle. When

you hear a soft click, the panel is engaged.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips Faxjet 325 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Faxjet 325

Philips Faxjet 325 User Manual - German - 4 pages

Philips Faxjet 325 User Manual - Dutch - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips Faxjet 325 Manual

Product: