288271
71
Zoom out
Zoom in
Previous page
1/76
Next page
69
3
4
5
Additional Information
Cause
The distance to the subject ex-
ceeds approximately 3.0 meters.
The flash discharged when dis-
tance to the subject was less than
60 cm.
The image is overexposed.
The brightness adjustment dial is
not set correctly.
The picture was taken in the Flash
Off mode under dark conditions.
The image is underexposed.
The brightness adjustment dial is
not set correctly.
The image conditions prevent the
Automatic White Balance system
from functioning property.
The REC(ord)/PLAY switch is not
set to PLAY.
Video connection cable is not cor-
rectly connected to the video out-
put terminal of the camera and the
input terminal of the TV.
A noise source, such as a motor,
is close to the camera.
This is a malfunction in the
camera’s internal memory.
The batteries are dead.
The Auto Power Off system has
activated.
There is an obstruction in the path
between the reception window of
the camera and the transmission
window of the remote control.
The reception window on the cam-
era or the transmission window on
the remote control is dirty.
The lithium battery in the remote
control is dead.
This condition occurs when a pic-
ture is taken of a well-lit subject. It
is called a smear.
Remedy
Reduce the distance to the sub-
ject.
Select the Flash Off mode.
Compensate the exposure with
the +/– button.
Turn the brightness adjustment
dial to the right or to the left to ad-
just the brightness.
Press the FLASH button to
change the setting.
Compensate the exposure with
the +/– button.
Turn the brightness adjustment
dial to the right or to the left to ad-
just the brightness.
Include a white or light-colored
object in the subject, or use the
flash or Fixed White Balance.
Slide the REC(ord)/PLAY switch to
PLAY.
Connect the cable properly.
Place the camera where it is not
close to a noise source.
Transfer important images to a
computer, then erase all files.
Replace the batteries with fresh
batteries.
Close the LCD monitor to turn off
the power, then turn on the power
again. Or, press the Release but-
ton more than one second.
Clear the path between the cam-
era and the remote control.
Clean both windows.
Replace the battery with a fresh
lithium battery (CR2032).
This is not a malfunction.
Problem
The flash discharged
properly but the image
is dark.
The picture is too
bright.
The image is underex-
posed.
The picture does not
show natural colors.
The camera fails to
play back the data or
display an image on
the monitor.
The image does not
play back clearly.
The image on the moni-
tor has disappeared.
The remote control (op-
tional) is malfunction-
ing.
The image has a verti-
cal trail.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips esp 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips esp 2 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info