301428
37
Zoom out
Zoom in
Previous page
1/88
Next page
ErgoLine D330/D340
Customer Engineer Manual
Page 2-17
All of the keys shown in Figures 2-2 and 2-4 are programmable. The downloadable
keys are shown in the non-shaded boxes. The function keys on the main terminal and
the DSS 1 keys are programmable on both levels. The numeric keys on the main
terminal are programmable on the second level only. The keys shown in the shaded
boxes (DSS 2 & DSS 3) are not downloadable in SSW 805 but are programmable on
both levels.
Facility Codes and Local Functions
To give the user full access to ISPBX and ErgoLine D330 and D340 facilities, it is
necessary to download facility codes. These facility codes are used for translation when a
function key has been programmed. Some codes need to be downloaded to allow
facilities to be presented in soft-key menus (for example, the automatic ring-back soft-key
is only presented when appropriate and when the automatic ring-back code has been
downloaded). It may also be required to download information to enable or disable certain
local ErgoLine terminal functions.
For the purposes of facility code and local function downloading, the same Operational
Maintenance commands are used as for function key downloading. This means that the
information to be downloaded is entered as if it were to be downloaded to function keys.
Information is downloaded to 'facility numbers' instead of 'function keys'. The facility
numbers have nothing to do with the actual keys and can be considered to be an 'address'
in the ErgoLine terminal memory. Facility codes are always downloaded to key level 0.
Table 2-3 provides a list of functions that can be downloaded and the Facility Number to
which the information is written in the ErgoLine terminal. Since the names used for
particular facility codes differ in various ISPBXs, their unique identity is given in the
column Result ID used when defining facility codes.
Local ErgoLine terminal functions are enabled or disabled by downloading a 0 or a 1. The
parameter name used in OM commands for the facility number is KEY.
Note: For a number of functions it is also necessary that the user has the correct
facility class marks assigned in the SOPHO-iS. If no facility class mark is assigned
the user cannot use the facility.
TABLE 2-3. FACILITY CODES AND ADDRESSES FOR FACILITY CODE DOWNLOADING
INFORMATION TO BE STORED
NUMBER/FACILITY CODE RESULT
ID
26
27
Executive/secretary absence Executive/secretary absent
Executive/secretary present
40
41
28
29
Do-not-disturb Activate do-not-disturb
Cancel do-not-disturb
66
67
30
31
Automatic ring-back Activate automatic ring-back
cancel automatic ring-back
56
57
32
33
Follow-me Activate follow-me
Cancel follow-me
27
32
34 Prepare Prepare follow-me 28
35 Activate from dest Activate follow-me from
destination
29
36 Deactivate from dest Deactivate follow-me from
destination
30
37 Cancel
38 Auto answer 0 = No,
1 = Continuous
2 = 1hour
L
39 Microphone blocked enable 0 = No, 1 = Yes L
40 One keystroke set-up 0 = No, 1 = Yes L
41 Add-on Activate 3-party call 55
FUNCTION
DOWNLOADED
FACILITY
NUMBER
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips ergoline d340 2 dg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips ergoline d340 2 dg in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips ergoline d340 2 dg

Philips ergoline d340 2 dg User Manual - Dutch - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info