ErgoLine D330/D340
Customer Engineer Manual
Page 2-27
3. Let us now assume that you now wish to download the follow-me facility
under a specific key. Look in Table 3 for the function code required for follow-
me, which
is 1. Notice also that there is no number to be stored on the first level of the
key and the second level of the key can be used for speed dialling.
If you now assume that the user wishes to use function key 12 for follow-me
and does not want to be able to over-write it (i.e. priority code 3). Assume
also that function key menu 2 is allocated to this ErgoLine D330/D340.
Preparing the download information of the Follow-me facility is done by
executing the following OM command:
CHFKDA: 2,12,0,,3,1;
The follow-me facility will now be available under key 12. You must have also
downloaded the facility codes as described in paragraph 2 for the facility to
work correctly.
4. Finally, let us assume that you wish to fix the
group ring
facility to
yes
, such that
it cannot be over-written by the user. Look in Table 2-4 for the facility number
required for group ring. This is facility number 42.
You will also see in the column
number/facility code
that to fix the facility to
yes
you must download the number 1 (as the KEY-DATA or FACILITY-CODE
parameter).
Assume also that function key menu 2 is allocated to this ErgoLine D330/D340.
Preparing the download information of the group ring facility is done by
executing the following OM command:
CHFKDA: 2,42,0,1,3;
The
group ring facility
will now be fixed as
yes
.
