682204
15
Zoom out
Zoom in
Previous page
1/24
Next page
2 Pour the contents of the milk circuit cleaner sachet in LatteGo (Fig. 35). Then fill LatteGo with water
up to the MAX indication (Fig. 36).
3 Slightly tilt LatteGo and put it on the hot water dispensing spout (Fig. 14). Then press it home until it
locks into place (Fig. 15).
4 Place a container under the milk spout (Fig. 32).
5 Press the MENU button, select DRINKS and scroll to MILK FROTH. Press the OK button (
) to start
dispensing the cleaning solution.
6 Repeat step 5 until LatteGo is empty.
7 When LatteGo is empty, remove it from the machine.
8 Rinse LatteGo thoroughly and fill it with fresh water up to the MAX level indication.
9 Click LatteGo onto the machine again.
10 Remove and empty the container. Then place it back under the milk spout.
11 Press the MENU button and select MILK FROTH in the DRINKS menu to start LatteGo rinsing cycle.
12 Repeat step 11 until LatteGo is empty.
13 Repeat steps 7-11.
14 When the machine stops dispensing water, the cleaning cycle is finished.
15 Disassemble all the components and rinse them under a lukewarm tap.
Descaling procedure
Please use Philips descaler only. Under no circumstances should you use a descaler based on sulfuric
acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your
machine and not dissolve the limescale properly. Not using the Philips descaler will void your
warranty. Failure to descale the appliance will also void your warranty. You can buy Philips descaling
solution in the online shop at www.philips.com/coffee-care.
1 When the machine asks you to descale it (Fig. 37), press the OK button ( ) to start. To start
descaling without being prompted by the machine, press the MENU button, scroll to select START
CALC CLEAN and press the OK button ( ) to confirm.
2 Remove the drip tray and the coffee grounds container, empty them and put them back into place.
3 Remove the water tank and empty it.
4 Remove LatteGo if present.
5 The display asks you to remove the AquaClean filter from the water tank (Fig. 38).
6 Place a large container (1.5L) under both the coffee and milk spout.
7 Pour the whole bottle of Philips descaler in the water tank and then fill it with water up to the CALC
CLEAN level (Fig. 39). Then place it back into the machine and press the OK button ( ) to confirm.
8 The first phase of the descaling procedure starts. The descaling procedure lasts approx. 30 minutes
and consists of a descaling cycle and a rinsing cycle.
9 Let the machine dispense the descaling solution until the display reminds you that the water tank
is empty.
10 Empty the water tank, rinse it and then refill it with fresh water up to the CALC CLEAN level.
11 Empty the container and place it back under the coffee and milk spout. Press OK ( ) to confirm.
12 The second phase of the descaling cycle, the rinsing phase, starts and lasts 3 minutes. The display
shows the rinsing icon and the duration of the phase.
13 Wait until the machine stops dispensing water. The descaling procedure is finished when the tick
appears on the display.
14 Press the OK button (
) to exit the descaling cycle. The machine starts heating up and performs
the automatic rinsing cycle.
15 Clean the brew group after descaling (see 'Cleaning the brew group under the tap').
16 Place a new AquaClean filter in the water tank and reactivate the AquaClean filter in the menu.
15
English
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips EP5340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips EP5340 in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips EP5340

Philips EP5340 User Manual - German - 26 pages

Philips EP5340 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info