682214
10
Zoom out
Zoom in
Previous page
1/24
Next page
Brewing coffee drinks
Brewing coffee with beans
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 To brew a coffee, press one of the one-touch drink buttons. To select another drink, press the
MENU button, select DRINKS, scroll down to the desired drink and press the OK button ( ).
3 To stop dispensing coffee, press the OK button ( ).
Brewing milk-based drinks
LatteGo consists of a milk container, a frame and a storage lid. To avoid leakage, make sure the frame
and the milk container are properly assembled as described below before you fill the milk container.
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 To assemble LatteGo, first insert the top of the milk container under the hook at the top of the
frame (Fig. 12). Then press home the bottom part of the milk container. You hear a click when it
locks into place (Fig. 13).
Note: Make sure that the milk container and the frame are clean before you connect them,
especially the surfaces where these parts connect.
3 Slightly tilt LatteGo and put it on the hot water dispensing spout (Fig. 14). Then press it home until it
locks into place (Fig. 15).
4 Fill LatteGo with milk up to the level indicated on the milk container for the drink you are brewing
(Fig. 16). Do not fill beyond the MAX indication.
Note: If you have personalized drinks and adjusted the milk volume, then you may need to fill the
milk container with more or less milk than indicated for this drink on LatteGo.
Aways use milk coming directly from the fridge for optimal results.
5 Place a cup on the drip tray.
6 To brew a milk-based drink, press one of the one-touch drink buttons. To select another type of
milk-based drink, press the MENU button, select DRINKS, scroll down to the desired drink and
press the OK button ( ). The display reminds you to put LatteGo onto the machine.
After brewing milk-based coffee beverages, the display indicates that you can clean LatteGo. For the
best hygiene, we strongly advise you to clean LatteGo after every use in the dishwasher or by rinsing it
under the tap. If the milk container is not empty yet or if you want to brew another milk-based drink
later, you can easily store LatteGo in the fridge. In this case we advise you to use the LatteGo QUICK
CLEAN function before storage. Go to the MENU to activate LatteGo QUICK CLEAN.
Brewing coffee with pre-ground coffee
1 Open the lid and pour one leveled measuring scoop of pre-ground coffee into the pre-ground
coffee compartment (Fig. 17). Then close the lid.
2 Place a cup under the coffee dispensing spout. For smaller cups you can use the espresso stand.
3 Press the AROMA STRENGTH button and select the pre-ground coffee brewing function. Press the
ESPRESSO button.
Note: With pre-ground coffee you can only brew one coffee at a time.
Dispensing hot water
1 If attached, remove LatteGo from the machine.
2 Press the MENU button. Select DRINKS, confirm and scroll to select HOT WATER.
3 Press the OK button (
) to confirm. The machine starts dispensing hot water.
10
English
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips EP5030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips EP5030 in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips EP5030

Philips EP5030 User Manual - German - 26 pages

Philips EP5030 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info