Manual Philips EP3246 (page 15 of 28) (English)

684439

Zoom out

Zoom in

1/28

When you use the machine for the first time, the AquaClean light starts flashing

orange. This indicates that you can start using the AquaClean water filter. If you do

not activate an AquaClean water filter, the light will switch off automatically after a

while.

Once you have installed the filter and activated it with the AquaClean icon, the

AquaClean light turns blue to confirm that the AquaClean water filter is active.

When the filter is exhausted, the AquaClean light starts flashing orange again to

remind you to replace the filter with a new one.

When the orange AquaClean light is off, you can still activate an AquaClean filter,

you will need to descale the machine first.

Activating the AquaClean water filter (5 min.)

The machine does not automatically detect that a filter has been placed in the water tank.

Therefore you need to activate each new AquaClean water filter that you install with the AquaClean

icon.

When the orange AquaClean light is off, you can still activate an AquaClean water filter, but you will

need to descale the machine first.

Your machine has to be completely limescale-free before you start to use the AquaClean water

filter.

Before activating the AquaClean water filter, it has to be prepared by soaking it in water as described

below. If you don't do this, air might be drawn into the machine instead of water, which makes a lot of

noise and prevents the machine from being able to brew coffee.

1 Shake the filter for about 5 seconds (Fig. 38).

2 Immerse the filter upside down in a jug with cold water, shake/press it a bit and wait until no more

air bubbles come out (Fig. 39).

3 The filter is now prepared for use and can be inserted into the water tank.

4 Insert the filter vertically onto the filter connection in the water tank. Press it down to the lowest

possible point (Fig. 40).

5 Fill the water tank with fresh water and place it back into the machine.

6 If attached, remove the LatteGo.

7 Place a bowl under the hot water spout/milk frother.

8 Press the AquaClean icon for 3 seconds (Fig. 41). The start light starts to pulse.

9 Press the start/stop button to start the activation process.

10 Hot water will be dispensed from the hot water spout/milk frother (3 min.).

11 When the activation process is finished, the blue AquaClean light goes on to confirm that the

AquaClean water filter has been activated correctly.

Replacing the AquaClean water filter (5 min.)

After 95 liters of water have flowed through the filter, the filter will cease to work. The AquaClean light

turns orange and starts to flash to remind you to replace the filter. As long as it flashes, you can

replace the filter without having to descale the machine first. If you do not replace the AquaClean

water filter, the orange light will go out eventually. In that case you can still replace the filter but you

first need to descale the machine.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips EP3246 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips EP3246

Philips EP3246 User Manual - English, German - 264 pages

Philips EP3246 User Manual - German - 31 pages

Philips EP3246 User Manual - Dutch - 264 pages

Philips EP3246 User Manual - Dutch - 30 pages

Philips EP3246 User Manual - Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 264 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips EP3246 Manual

Product: