654436
7
Zoom out
Zoom in
Previous page
1/29
Next page
7Getting started
3 Getting strted
Caution
Before you connect and install your recorder, rst
read the safety instructions (see Safety instructions).
Charging the battery
Charge the built-in battery before you use the device
for the rst time or if you haven’t used it for an extended
time period. If the battery is completely discharged and
your device turns o, allow the battery to charge for a
while before you turn on the device.
Note
The length of the USB cable might impact the
charging speed. Longer cables usually extend the
charging time.
While the device is connected to a computer, it can’t
be operated manually.
Before you charge the battery via computer, make sure
that your computer is turned on.
X A charging battery icon appears on the screen
and an orange indicator light illuminates,
indicating that the device is recharging.
X When the device is fully recharged, the orange
indicator light turns o.
Turn the device on and o
To turn the device on or o:
Slide and hold the Power switch on the left side of the
device downwards for two seconds until you see the
Philips emblem on the screen.
Note
When the battery indicator is displayed, charge
the device promptly.
Key lock
You can lock your device when it’s active to prevent any
unwanted device operations or access.
To lock the device:
Slide the Power switch on the left side of the device
upwards towards the lock symbol.
X The lock symbol appears on the screen for a
moment.
X All buttons are locked now.
To unlock the device:
Slide the Power switch downwards.
Connect to a computer
You can use your recorder as a USB mass storage to
conveniently store, back up and move les. Link the
device to a computer with a USB cable. Your recorder will
automatically be recognized as a mass storage device.
You don’t need to install any software.
For more information on how to connect your device to a
computer, see the illustration in Charging the battery.
Caution
Don’t disconnect the USB cable from the device while
you are transferring les. This might cause data loss.
Note
While the device is connected to a computer, it can’t
be operated manually.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips DVT7500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVT7500 in the language / languages: English as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info