1055
37
Zoom out
Zoom in
Previous page
1/120
Next page
27
Connection using a component video
(Y Pb Pr/YUV) cable
Component video (Y Pb Pr) is the highest quality picture transmission option. This is achieved by
dividing the video signal into a luminance signal (Y) and two colour difference signals - red minus
luminance (U) and blue minus luminance (V). As a rule, "Cr" or "R-Y" is used to describe the red
difference signal and "Cb" or "B-Y" the blue difference signal.
These signals are transmitted through separate lines. The connectors of this cable and the
corresponding sockets are usually green (luminance), blue (Pb, Cb, B-Y), and red (Pr, Cr, R-Y).
If you choose this type of connection, the DVD recorder must already be connected and
completely installed (initial installation complete).
Switching of the signal to the COMPONENT VIDEO OUT sockets is carried out in a menu
that is not yet available during the initial installation.
Moreover, the installation of the GUIDE Plus+
®
system must also be completed (local post code
must be entered).
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 Switch on the DVD recorder using STANDBY-ON m .
3 Press the SYSTEM-MENU button on the remote control. The menu
bar appears.
4 Select '
A
' using D oder C and confirm with P- B .
5 Select the '
t
' symbol using P- B or P+ A and confirm with C .
Picture
TV shape 16:9
Black level shift Off
Video shift ï
Video output RGB + CVBS
6 Select the line 'Video output' using P+ A or P- B and confirm
with C .
7 Select your setting with P- B or P+ A .
Which setting should I choose?
Since YPbPr (YUV) signals are not transmitted simultaneously with
S-video(Y/C) and video (FBAS/CVBS) signals, you can choose between the two
types. The 'RGB' signal is switched off.
'S-video + YPbPr' Component Video (YUV) and S-Video(Y/C).
On the socket OUT S-VIDEO (Y/C) no GUIDE Plus+
®
menus.
'CVBS + YPbPr'Component Video (YUV) and Video (FBAS/CVBS).
On the socket VIDEO (CVBS) OUT no GUIDE Plus+
®
menus.
With all other settings, the signal is switched off at the COMPONENT
VIDEO OUT sockets. This will also be displayed as information on the screen.
For more information on the other settings, read section 'Picture settings'
('Video output') in chapter 'User preferences'.
?
8 Confirm with OK .
ENGLISH
Installing your DVD recorder
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips DVDR80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips DVDR80 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips DVDR80

Philips DVDR80 User Manual - German - 124 pages

Philips DVDR80 User Manual - Dutch - 126 pages

Philips DVDR80 User Manual - Spanish - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info