Manual Philips dsr1000 (page 19 of 26) (English)

53706

Zoom out

Zoom in

1/26

4.4.4 LNB settings

(1) LNB

{ON} standard setting

{OFF} operation without LNB signal (e.g. only with special cabling systems)

(2) In standby mode

{OFF} standard setting

N.B.: For certain units only use the {OFF} setting, as otherwise the receiver

continues to supply power to the LNB also in standby mode.

The power consumption of the receiver can thus increase from 2 watts to up

to 10 watts in standby mode.

{ON} The LNB power remains on in standby mode, e.g. to supply power to an

appropriate multi-consumer unit.

4.4.5 DiSEqC (Digital Satellite Equipment Control)

In the DiSEqC menu the control signals must be set in accordance with the requirements of your

satellite equipment.

(1) 22 kHz signal

{OFF} 22 kHz not active

{High/Low} 22 kHz switches between high and low band

{Pos. A/B} 22 kHz switches between 2 satellites

(2) Tone burst

{OFF}

{High/Low} activates the tone burst depending on the reception frequency

{Pos. A/B} selects orbit position 1/3 or 2/4

{Opt. A/B} switches between orbit position 1/2 and 3/4

(3) DiSEqC

{OFF}, {ON} Select {ON}, if you connect the receiver to a DiSEqC-compatible satellite

receiver.

(4) DiSEqC repeat (use for cascade arrays)

{OFF} no repetition of DiSEqC signal

{1} the DiSEqC signal is repeated once

{2} the DiSEqC signal is repeated twice

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips dsr1000 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips dsr1000 Manual

Product: