8600
17
Zoom out
Zoom in
Previous page
1/20
Next page
15
Troubleshooting
Telephone troubleshooting.....
PROBLEMS CAUSES SOLUTIONS
- No dialling tone when
pressing .
- The base station is not properly
connected to electricity or to the
telephone sockets.
- Too far from the base station
- Battery pack is low (low battery icon
is displayed).
- Check the connections.(inside
cover).
- Move closer to the base
- Charge battery pack. (inside
cover).
- icon is blinking.
- The handset is not registered.
- The handset is out of range.
- Register the handset to the base
station. (p 14)
- Move closer to the base station.
- When the handset is placed
on the charging unit, no beep is
heard.
- The handset is not placed correctly
on the base station charging unit.
- Charging contacts are dirty.
- Take the handset off the base
station and put it back again.
- Clean them with a clean and dry
cloth.
- Battery icon remains empty
although the handset has
charged for 24 hours.
Handset battery pack is defective.
Please contact your PHILIPS
dealer in order to purchase new
rechargeable battery pack.
- No symbol on the display. - Battery pack is uncharged.
- The product is not properly connected
Charge battery pack. (inside cover).
Make sure your product is plugged
in. (inside cover).
- A phonebook entry has not
been memorised.
The phonebook you wish to use is full.
Delete some entries to free
memory space.
- Bad audio quality (crackles,
muted, echo, etc.).
- Interference from nearby electrical
appliance.
- Base station installed in a room with
thick walls.
- You are using the handset too far
from the base station.
- Try to plug the base station in
elsewhere.
- Install the base station in a
different room.
- Move closer to the base station.
- Caller display does not work.
Service not activated, wrong operator
or wrong setting.
Check your subscription with your
operator.
z Please read this user guide carefully before calling your Philips
Customer Care Center.
z IF NEEDED, check that the appropriate country code is set in the
phone : (see page 1).
: Short .
: Long.
Changing recall type (flash setting)
The use of some services accessed with (call waiting, call forward...) will
depend on the flash setting (Short/Long) according to your installation type (Public,
PABX). (country dependent)
or to choose between
Short or Long
www.philips.com/support
DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 15
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Dect 215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Dect 215 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Dect 215

Philips Dect 215 User Manual - German - 20 pages

Philips Dect 215 User Manual - Dutch - 20 pages

Philips Dect 215 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info