653062
31
Zoom out
Zoom in
Previous page
1/38
Next page
www.philips.com/support
Always there to help you
Register your product and get support at
D131
D136
Extended user
documentation
Question?
Contact
Philips
4 EN
2 Your phone
Congratulations on your purchase and welcome
to Philips!
To fully benet from the support that Philips
offers, register your product at www.philips.
com/welcome.
What is in the box
Handset**
Base station (D131)
Base station (D136)
Charger**
Power adapter**
Line cord*
2 x AAA rechargeable batteries**
Guarantee
Short user manual
Note
* In some countries, you have to connect the line
adapter to the line cord, then plug the line cord to the
telephone socket.
** In multi-handset packs, there are additional handsets,
chargers, power adapters and batteries.
4XLFNVWDUWJXLGH
6 EN
Overview of the base station
D131
a
Press to nd handsets.
Press and hold to enter the registration
mode.
D136
a
Press to nd handsets.
Press and hold to enter the registration
mode.
a
a
7EN
3 Get started
Caution
Make sure that you have read the safety instructions in
the 'Important safety instructions' section before you
connect and install your handset.
Connect the base station
Warning
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the phone.
Use only the supplied power adapter to charge the
batteries.
Note
If you subscribe to the digital subscriber line (DSL) high
speed internet service through your telephone line,
ensure you install a DSL lter between the telephone
line cord and the power socket. The lter prevents
noise and caller ID problems caused by the DSL
interference. For more information on the DSL lters,
contact your DSL service provider.
The type plate is located on the bottom of the base
station.
1 Connect each end of the power adapter
to:
the DC input jack at the bottom of the
base station;
the power socket on the wall.
2 Connect each end of the line cord to:
the telephone socket at the bottom of
the base station;
the telephone socket on the wall.
3 Connect each end of the power adapter
to (for multi handset version only):
the DC input jack at the bottom of the
extra handset charger.
the power socket on the wall.
29EN
Note
If the PIN is incorrect or no base is found within a
certain period, a notication message will be displayed
on your handset.
If registration fails, unplug the power adapter from the
base station and plug it back. Wait for 15 seconds, and
then repeat the registration procedure.
The preset PIN is 0000. No change can be made on it.
Unregister the handsets
If two handsets share the same base station, you
can unregister a handset with another handset.
1 Press MENU/OK.
2 Select [SERVICES] > [UNREGISTER],
then press MENU/OK to conrm.
3 Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
4 Select the handset number to be
unregistered.
5 Press MENU/OK to conrm.
» The handset is unregistered.
Tip
The handset number is displayed beside the handset
name in standby mode.
Note
A handset cannot unregister itself.
Restore default settings
You can reset your phone settings to the
original factory settings.
1 Press MENU/OK.
2 Select [SERVICES] > [RESET], then press
MENU/OK to conrm.
» A conrmation request is displayed on
the handset.
3 Press MENU/OK to conrm.
» All settings are reset.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips D136 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips D136 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips D136

Philips D136 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info