26364
62
Zoom out
Zoom in
Previous page
1/88
Next page
62 2. Netwerken
PC-functies
Multifunctioneel apparaat
voorbereiden
Steek de WLAN-adapter in de USB-aansluiting aan de
zijkant van uw apparaat.
²
De adapter voor draadloos netwerk van uw
multifunctioneel apparaat draagt gegevens
over via het draadloze protocol IEEE 802.11g,
kan echter ook in een bestaand IEEE 802.11b-
net worden geïntegreerd. Gebruik voor de aan-
sluiting op het multifunctionele apparaat uit-
sluitend originele adapters (zie bestelservice aan
de achterzijde van deze handleiding). Andere
zend- en ontvangstadapters kunnen het apparaat
beschadigen.
Onafhankelijk van het feit of u uw multifunctioneel
apparaat in een draadloos infrastructuur- of ad hoc
netwerk gebruikt, moet u bepaalde netwerk- en vei-
ligheidsinstellingen uitvoeren (bijv. de Service-Set-ID
(SSID) en de WEP-sleutel). De instellingen moeten
met de gegevens van het netwerk overeenstemmen.
Soort netwerk instellen
Druk op MENU/OK en 912 om het soort net-
werk te selecteren. Kies met / Ad-hoc of Infra-
struc. (zie hoofdstuk Draadloze netwerken). Beves-
tig dit met OK.
a Als u Ad-hoc kiest, wordt u gevraagd het ra-
diokanaal voor de transmissie in te stellen (vooraf
ingesteld is 10). U kunt een willekeurig kanaal
invoeren, als er storingen met naburige draadloze
netwerken ontstaan. Het radiokanaal moet met het
ingestelde kanaal op de PC overeenstemmen. Toets
het radiokanaal in en bevestig dit met OK.
b Als u Infrastruc. kiest, wordt u gevraagd de
authentiseringsmodus te selecteren. Hiermee be-
paalt u of het multifunctionele apparaat zich met
de WEP-sleutel bij het access point (gateway, rou-
ter) authentiseert en of de gegevens voor de trans-
missie in het draadloze netwerk gecodeerd moeten
worden. Volgende selectiemogelijkheden staan ter
beschikking:
GEEN – Er vindt geen authentisering plaats en ge-
gevens worden ongecodeerd overgedragen.
OPen – Er vindt geen authentisering plaats, maar
gegevens worden gecodeerd overgedragen.
VRIJGEGEVEN – Het multifunctionele apparaat
authentiseert zich met de ingetoetste WEP-sleutel
bij het access point (gateway, router) en gegevens
worden gecodeerd overgedragen.
beide – De authentiseringsmodus wordt door
het apparaat willekeurig geselecteerd.
Kies een modus met /, en bevestig dit met OK.
Als u oPen, VRIJGEGEVEN of beide instelt, moet
u met de functie 914 een WEP-sleutel intoetsen.
Netwerknaam (SSID) intoetsen
Druk op MENU/OK en 913 om de netwerknaam
(Service-Set-ID (SSID)) in te toetsen. Toets de SSID in
en bevestig dit met OK (vooraf ingesteld is Crystal_
mfp). De netwerknaam vindt u in de netwerkinstellin-
gen van uw PC. De SSID moet met de SSID op de PC
of op het access point overeenstemmen.
WEP-codering activeren
Æ
Onbeveiligde draadloze netwerken zijn voor
buitenstaanders toegankelijk! Bescherm uw
netwerk daarom in ieder geval tegen onbevoegde
toegang met de WEP (Wired Equivalent Pri-
vacy-)standaard. U moet dezelfde WEP-sleutel
zowel op uw multifunctioneel apparaat als op de
aangesloten PC’s of op het access point (gateway,
router) gebruiken.
De WEP-codering is vanaf fabriek gedeactiveerd.
Druk op MENU/OK en 914. Selecteer met /
64-bit of 128-bit. Bevestig dit met OK. Toets de
WEP-sleutel in en bevestig dit met OK.
²
Met de 64-bit-codering moet de WEP-sleutel
uit 5 tekens (ASCII) of 10 cijfers (hexadeci-
maal) bestaan. Met de 128-bit-codering moet de
WEP-sleutel uit 13 tekens (ASCII) of 26 cijfers
(hexadecimaal) bestaan. U kunt vier verschillende
WEP-sleutels intoetsen. De WEP-sleutel vindt u
in de netwerkinstellingen van uw PC.
Verbindingsmodus selecteren
Met de verbindingsmodus stelt u het IP-adres en sub-
net-masker in. In een infrastructuurnetwerk kunt u kie-
zen of de instellingen automatisch uitgevoerd moeten
worden resp. of u het IP-adres en het subnet-masker
handmatig wilt intoetsen. In een ad hoc netwerk moet
u de instellingen handmatig uitvoeren.
Druk op MENU/OK en 915 om de verbindings-
modus te selecteren. Kies met / Auto (DHCP) of
handmatig en bevestig dit met OK (vooraf inge-
steld is Auto (DHCP), in een ad hoc netwerk moet u
handmatig kiezen).
²
De automatische instelling van IP-adres en
subnet-masker kan op de aangesloten net-
werk-PC’s even duren.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips CRYSTAL650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips CRYSTAL650 in the language / languages: Dutch as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips CRYSTAL650

Philips CRYSTAL650 User Manual - English - 80 pages

Philips CRYSTAL650 User Manual - German - 88 pages

Philips CRYSTAL650 User Manual - Italian - 84 pages

Philips CRYSTAL650 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info