26364
57
Zoom out
Zoom in
Previous page
1/80
Next page
2. Networks 57
2. Networks
2. Networks
You can connect your multifunction machine to a PC
with a USB cable or to a PC or network via a wireless
connection.
With the USB cable, you can connect your multifunction
machine to a PC that is connected to a network. Other
PCs on this network can then access the multifunction
machine if it is shared for use on the network. You can-
not connect the machine directly to a network over the
USB cable!
With a WLAN adapter, it is possible to integrate the
multifunction machine into an existing wireless net-
work as a network printer. It functions only with an
original adapter, which you can purchase through our
order service (see the back page of this user manual).
More information: www.fax.philips.com
Wireless Networks
One refers to a wireless network or WLAN (Wireless
Local Area Network) if at least two computers, printers
or other devices communicate in a network over radio
waves (high frequency waves). e data transmission in
the wireless network is based on the TCP/IP protocol.
Depending on the way the network is structured, it is
referred to either as an infrastructure or ad-hoc net-
work.
Infrastructure Wireless Network
In an infrastructure network, multiple devices commu-
nicate via a central access point (gateway, router). All
data are sent to the access point (gateway, router) and
distributed from there.
Ad-hoc Wireless Network
In an ad-hoc network, the devices communicate with
each other equally, without an access point (gateway,
router) acting as intermediary. e transmission rate
in an entire ad-hoc wireless network depends on the
worst connection in the network. e transmission rate
depends on the spatial distance as well as obstacles be-
tween the sender and receiver such as walls or ceilings.
Setting Up Wireless
Networks (WLAN)
ree steps are required to integrate your multifunction
machine into a wireless network (WLAN):
1 Configure the network on your PC.
2 Configure your multifunction machine for net-
work operation.
3 Install the software C S IH with the
required printer drivers on your PC after you have
configured the machine.
Æ
Before you configure the multifunction ma-
chine, the network must be set up on your PC
and, if applicable, on all connected devices (other
PCs, access point, gateway, router) and must be
functioning. All required information for config-
uration of the machine, such as network names
(SSID), radio channel, WEP key, IP address or
subnet mask must match the information of the
network. You can find this information on your
PC under S > S > N C-
. Select the WLAN there. Consult the
user manual of your WLAN adapter for instruc-
tions on how to configure the wireless network
on your PC. In larger networks, consult your
network administrator.
²
Faultless communication is ensured if you
also use an original adapter on your PC (see
order service on the back page of this user man-
ual). e newest drivers for the original adapt-
er and other information can be found on our
Internet page: www.fax.philips.com
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips CRYSTAL650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips CRYSTAL650 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips CRYSTAL650

Philips CRYSTAL650 User Manual - German - 88 pages

Philips CRYSTAL650 User Manual - Dutch - 88 pages

Philips CRYSTAL650 User Manual - Italian - 84 pages

Philips CRYSTAL650 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info