26364

Philips CRYSTAL650 Manual

34
Zoom out
Zoom in
Previous page
1/80
Next page
34 7. Fax Switch
Machine Functions
Manual Fax Reception
If you select the option manual in the setting Fax
rings (see also Setting SM Modes), faxes are not
received automatically. You must start the fax reception
manually: press the Y button on your multifunction
machine (or *5 on your external telephone). is is
useful if you would like to receive your faxes on the PC
via an external modem.
Using External
Telephones (Easylink)
e Easylink function offers you additional options for
managing external devices that are connected to the
same telephone line as your multifunction machine. To
this end, additional telephones must be set to the tone
dialling mode (DTMF tones). Please consult the user
manual for your external device on how to set the de-
vice to tone dialling mode.
Æ
Only change these codes if it is absolutely
necessary. Please note that the codes must be
different. Otherwise the following message will
appear on the display: CODE NOT OK.
Starting Fax Reception
If you pick up on an additional telephone and notice
that the call is a fax transmission (whistling tone or si-
lence), you can start the fax reception either by pressing
the Y button on the multifunction machine or *5
on the external telephone.
²
If you would like to change the predefined
code, press MENU/OK and 641. Enter
the new code and confirm with OK. e code
should start with * or #!
Taking Over the Line
If you pick up on an external telephone and the
multifunction machine continues to ring or attempts
to receive faxes, you can disconnect the multifunction
machine from the line and accept the call by pressing
** on the external telephone.
²
If you would like to change the predefined
code, press MENU/OK and 643. Enter
the new code and confirm with OK. e code
should start with * or #!
Using an External
Answering Machine
Connect the external answering machine as described in
chapter Installation / Connecting Additional Devices.
For the best possible operation, the external answering
machine must be set to one or two rings. Set total
rings and Fax rings to at least two more rings
than your external answering machine to prevent calls
from being automatically accepted by the fax switch.
If you switch off the answering machine, calls will be
accepted by the fax switch.
Setting example:
Number of rings on answering machine 2
FAX RINGS 3
TOTAL RINGS 5
²
e outgoing message of your external an-
swering machine should be shorter than ten
seconds. Avoid music in the outgoing message.
If your external answering machine has a “con-
serving function” (i.e. a function that changes the
number of rings as soon as new messages have
been recorded), it is best to deactivate this func-
tion.
It can occur that the answering machine counts
fax calls in addition to the received messages. If
your external answering machine records fax sig-
nals, but your multifunction machine cannot re-
ceive faxes, you should inspect the connection of
your external answering machine (see chapter In-
stallation / Connecting Additional Devices).
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips CRYSTAL650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips CRYSTAL650 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips CRYSTAL650

Philips CRYSTAL650 User Manual - German - 88 pages

Philips CRYSTAL650 User Manual - Dutch - 88 pages

Philips CRYSTAL650 User Manual - Italian - 84 pages

Philips CRYSTAL650 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info